Studies in the field of environmental epidemiology indicate that for the adverse effect of inhaled particles not only particle mass is crucial but also particle size is. Ultrafine particles with diameters below 100 nm are of special interest since these particles have high surface area to mass ratio and have properties which differ from those of larger particles. In this paper, particle size di...

Consumable DE-GMAW is an innovative welding process, which can significantly increase the deposition rate without raising the base metal heat input to an undesired level. To be qualified as a practical manufacturing process, feedback control is required to assure the presence and stability of the bypass arc. To this end, the bypass arc voltage was selected to monitor the state of the bypass arc...

In order to study the effects of laser induced metal vapour on arc plasma during laser arc double sided welding (LADSW), emission spectroscopy techniques were utilised. The arc plasma in LADSW of 5A06 aluminium alloy was compared with conventional gas tungsten arc welding (GTAW) in this work. The electron temperature and density were estimated by the Saha– Boltzmann equation and the Stark broad...

The present paper describes fuzzy logic simulation of shielded metal arc welding (SMAW) process to predict the Quality of weld joint. It describe the quality of weld joint & effect of welding current, voltage and welding speed on tensile strength of shielded metal arc pipe welded mild steel joints. An ERW Mild steel pipe I S 1239 of 6 mm thickness and 150 mm diameter were used as the base mater...

This article provides an overview of the influence welding parameters and filler material on changes in heat-affected zone (HAZ) thermo-mechanically controlled processed (TMCP) steel welded joints. The research focused evaluating effect heat input cooling rate width soft zone, which significantly affects mechanical properties negative is more pronounced as thickness decreases. Therefore, object...

This paper describes the relationships between ultra-violet emission, ozone generation and CrVI production in MIG welding which were measured as a function of shield gas flow rate, welding voltage, electrode stick-out and shield gas composition using an automatic welding rig that permitted MIG welding under reproducible conditions. The experimental results are interpreted in terms of the physic...

Sensing plays a key role in automating and controlling welding processes. Although arc light sensing has advantages over through-the-arc sensing for arc length control and seam tracking, the current technology relies on experimental data and lacks theoretical foundation. To improve measurement accuracy, this work addresses the theoretical foundation for arc light sensing. A theoretical model ha...

In this research, the effect of vibration at the resonant range (75 Hz) on the hardness and tensile strength of AA-5083-H321 aluminum alloy, were welded by gas metal arc welding (GMAW) investigated. Vibration forces were ranged from 850 N to 2200 N, under identical welding parameters. Tensile strength and hardness testing of welded samples were performed. After mechanical tests, the fracture su...