Abstract: Electroless Nickel (EN) composite coatings embedded with Cr2O3 and/or MoS2 particles were deposited to combine the characters of both Cr2O3 and MoS2 into one coating in this study. The effects of the co-deposited particles on corrosion behavior of the coating in 3.5% NaCl media were investigated. The results showed that both Ni-P and Ni-P composite coatings had significant improvement...

TiO2 nano-particles were used in electroless plating bath to obtain Ni/P/nano-composite coatings. The coatings were heat treated at 200, 400, 600 and 700 oC and their chemical and physical properties were investigated and it was found that 400 oC was the optimum temperature for the heat treatment of the coatings. The micro-hardness test of coatings showed that t...

An attempt has been taken to improve the corrosion resistance of twinning-induced plasticity (TWIP) steels (Fe-25Mn and Fe-25Mn-3Al) by electroless Ni-P coating. Corrosion resistance in 3.5% NaCl and 0.1M H2SO4 solutions was characterized by the potentiodynamic polarization curves and Tafel method calculations. It was found that Ni-P coating improved the corrosion resistance by the factor of 4 ...

nowadays, magnesia carbon refractories are very important for the iron and steel industries. it is dueto their unique properties, such as low wet ability with melt iron and steel. therefore, it is importantto extend the life of the refractory. in this research, the effect of calcined alumina and nano carbon onmechanical strength and corrosion resistance against slag in magnesia carbon refractor...

Cerium conversion coatings are a potential alternative to chromium conversion coatings for improving the corrosion resistance of magnesium alloys. This study detailed the microstructure and corrosion resistance of cerium conversion coatings on AZ31 magnesium plates treated in 0.05 kmolm 3 cerium nitrate solution, with and without 0.25 kmolm 3 hydrogen peroxide. The results indicate that the cor...

in the polymer electrolyte membrane fuel cells (pemfcs), low corrosion resistance and high interfacial contact resistance (icr) are two controversial issues in usage of aisi 316l stainless steel as a metallic bipolar plate. for solving these problems, investigation and development of different coatings and/or surface treatments are inevitable. corrosion behavior and icr of aisi 316l specimens c...

Synthesis of functionally gradient coating was the main goal of researches to cover some deficiencies of metallic coatings. In this study, a new strategy for generating functionally gradient coatings of nickel-chromium on a carbon steel substrate using pulse electrodeposition has been presented. The gradual changes of the duty cycle and pulse frequency were used to generate the functionally gra...

Aluminum matrix composites (AMCs), reinforced with ceramic particulates, have significant applications in the field of aerospace, marine, automobiles, sports and recreation. Al-TiC particulate composite has better potential for high-temperature applications. The corrosion behaviour of Al 6061-TiC particulate composites prepared by stir casting route, has been explored in chloride medium using e...

An innovative prototype sensor containing A36 carbon steel as a capacitor was explored to monitor early-stage corrosion. The sensor detected the changes of the surface- rather than the bulk- property and morphology of A36 during corrosion. Thus it was more sensitive than the conventional electrical resistance corrosion sensors. After being soaked in an aerated 0.2 M NaCl solution, the sensor's ...

corrosion makes huge economic and ecologic damage all over the world. biologic corrosion of sewer pipes is considered as a serious limitation in economic perspectives. to prevent biologic corrosive damage, lining techniques can be applied by materials and aggregate resistant to attack bacterially in sewer pipes. the role of bacteria is that they convert sulfur compounds into sulfuric acid which...