Conducting experimental tests is an attractive and straight-forward research approach but is time-consuming and expensive in comparison with finite element modelling. A numerical approach has been developed in this project to investigate the performance of simple steel connections in fire conditions. This paper presents a quasi-static numerical analysis with cohesive elements to investigate the...

Knowledge of the yield point and ductility of a structure is important in seismic design. The yield point of an assembly is defined as a point where it begins to plastically deform, while ductility describes its ability to yield without substantial reduction in strength. These parameters can be determined from the analysis of the load-deformation curves resulting from destructive tests. To date...

This paper evaluates the behavior of channel shear connectors, embedded in a concrete slab, with different concrete materials. The results of a series of limited push-out specimens were presented and discussed. The push-out tests comprise of channel shear connectors in different types of concrete. Reinforcement was included in some specimens, as well. The results showed that using reinforcement...

Original scientific paper Based on the experimental research on three cross-shaped columns with 500 MPa grade reinforcing steel bars, the contrastive analysis is made on failure mode, bearing capacity and displacement ductility of each column specimens with different stirrup spacing under the identical axial compression ratio. The research shows that the longitudinal bars yield before spalling ...

The previously formulated model of the gravity-driven collapse of the twin towers of the World Trade Center on 9/11/2001 was shown to match all the existing observations, including the video record of the crush-down motion of the top part of tower during the first few seconds, the seismically recorded duration of collapse, the size distribution of particles caused by impact comminution of concr...

Silicon carbide composites (SiC/SiC) are promising candidate materials for fusion reactors. For the practical application of this class of materials, a design basis for SiC/SiC composites needs to be developed because of inherent brittle-like fracture, i.e., quasi-ductility, which is totally different from ductility of metals. For this purpose, the failure behavior, i.e., matrix cracking behavi...

The Cr-Ta alloy with an eutectic structure has a good combination of high strength and oxidation resistance at elevated temperatures up to 1,200°C. It is an ideal candidate for ultrahigh-temperature applications. However, the material shows low ductility and fracture toughness at room temperature. An effective way to improve the ductility and fracture toughness is to obtain an aligned microstru...

In this paper, the flexural behavior of High-performance Fiber-Reinforced Cementitious Composite (HPFRCC) has been investigated, especially focusing on the localization of cracks, which significantly governs the flexural behavior of HPFRCC members. From four points bending tests with HPFRCC members, it was observed that almost evenly distributed cracks formed gradually, followed by a localized ...

Cu-0.4Cr (wt.%) alloys with the microalloying of Hf elements were subjected to a modified rolling–aging process achieve high strength, electrical conductivity and ductility simultaneously. Transmission electron microscopy X-ray line broadening analysis conducted characterize microstructures these alloys. Deformation twins high-density dislocations introduced into copper via Hf, improving mechan...