The main objective of this project was to investigate the behavior and the damaging effects of hot tear segregations in the continuously cast steel blooms on the final product quality. To achieve this aim, plant data from three different types of steels were used. Investigations using the scanning electron microscope (SEM) equipped with energy dispersive x-ray spectroscopy (EDS) probe and metal...

Transfer table is an essential stage between roughing and finishing rolling stands in a hot-strip rolling mill. High temperature and long time that strip is exposed to air at this stage cause a considerable heat loss that accounts for uneven temperature distribution, non-uniform surfaces, reduced product quality and increased production costs. Using thermal shields on the transfer table is cons...

To analyze the effect of initial orientation in activity twinning and texture development, magnesium single crystals were rolled at 400 °C (nominal furnace temperature) two specific orientations. In both orientations, rolling direction sheet (RD) was parallel to c-axis. For 1, 112¯0 normal (ND), for 2, it 101¯0 direction. The samples 30%, 50% 80% thickness reduction. After rolling, all quenched...

in this study, the effects of nitrogen addition on the production of ultrafine/nano grained aisi 201l stainlesssteel by advanced thermo-mechanical process were investigated. cast samples were first homogenized at 1200 °c for 4 h, hot-rolled at 1100 °c and finally, solution-annealed at 1150 °c for 2.5 h. unidirectional and cross multipass cold rolling at 25 °c was carried out to 90% reduction in...

A steel hot rolling mill subjects steel slabs to high temperatures and pressures in order to form steel coils. We describe the scheduling problem for a steel hot rolling mill. We detail the operation of a commercial decision support system which provides semi-automatic schedules, comparing its operation with existing, manual planning procedures. This commercial system is currently in use in sev...

A crack-free Ti-43Al-9V-0.2Y alloy sheet was successfully fabricated via hot-pack rolling at 1200 °C. After hot-rolling, the β/γ lamellar microstructure of the as-forged TiAl alloy was completely converted into a homogeneous duplex microstructure with an average γ grain size of 10.5 μm. The dynamic recrystallization (DRX) of the γ phase was systematically investigated. A recrystallization fract...