To explore the influence of tip clearance on pressure fluctuation in a low specific speed mixed-flow pump, tip clearances δ of 0.25 mm, 0.75 mm and 1.00 mm, along with no tip clearance, were selected. The reliability of the simulation was verified by comparison with the experimental data of external characteristics and fluctuation in the guide vane passage. Through ANSYS-CFX, MATLAB code and fa...

This article represents experimental study work carried out on a single stage diffuser type centrifugal pump. The flow-induced pressure pulsations, mechanical vibrations and noise has been monitored during the experimentations for five different flow rates by varying the radial clearance. For each case of radial clearance and flow conditions, overall levels and frequency spectra, in a wide freq...

Basing on the principle of virtual equivalent velocity, this paper adapt the method of extending axis flow impeller to the quasi 3-D flow design of diagonal flow impeller with the experimental cascade data of circular arc blade. The performances of diagonal flow fan with outlet guide volute designed by this method, are compared with that designed by airfoil section cascade data. The reasonablen...

Transgenic tobacco roots offer a potential alternative to leaves for monoclonal antibody (MAb) production. A possible method for extraction of MAbs from roots is by homogenization, breaking the roots into fragments to release the antibody. This process was assessed by shearing 10 mm root sections ("roots") in a 24 mL ultra-scale down shearing device, including an impeller with serrated blade ed...

The vortex-ingesting stirred tank reactor uses a combination of a helical screw impeller and concentric draft-tube to entrain and recycle headspace gas and disperse it as bubbles in a liquid reaction solvent. This study presents an experimental characterisation of a 0.29 m diameter vortex-ingesting gas-liquid stirred reactor, operated with solids mass fractions from 0 to 25%, over a range of sp...

Liquid-liquid dispersions are commonly used for separations and reaction systems, because the added interfacial area due to dispersion aids in mass transfer and chemical reaction rates. Transient coalescence experiments have been performed for a wide range of dispersed-phase fractions and impeller speeds. A similarity transformation of the experimental drop-size distribution is possible for mos...

The spinner flask bioreactor has been widely used in in vitro cell culturing processes due to its superiority in providing a homogeneous culture environment compared to traditional culturing methods. However, there is limited understanding of the flow fields in these bioreactors, and optimum culture conditions are yet to be determined. This article presents the experimental characterization of ...

In order to simulate the energy efficiency fluctuation behavior of an industrial centrifugal pump with a six-blade impeller, a full-scale three-dimensional (3D) an unsteady state computational fluid dynamics (CFD) model was used. Five operational points with different flow fluxes were numerically investigated by using the Navier–Stokes code with shear-stress transport (SST) k-ω turbulence model...

This research adopts the quasi three-dimensional hydraulic design method for the impeller of high specific speed mixed-flow pump to achieve the purpose of verifying the hydraulic design method and improving hydraulic performance. Based on the two families of stream surface theory, the direct problem is completed when the meridional flow field of impeller is obtained by employing iterative calcu...

Chaotic features of the macro-instability (MI) of flow patterns in stirred tanks are studied in this paper. Datasets obtained by measuring the axial component of the fluid velocity and the tangential force affecting the baffles are used. Two geometrically identical, flat-bottomed cylindrical mixing tanks (diameter of 0.3m) stirred with either pitched blade turbine impellers or Rushton turbine i...