A time domain approach for predicting the coupled flutter and buffeting response of long span bridges is presented. The frequency dependent unsteady aerodynamic forces are represented by the convolution integrals involving the aerodynamic impulse function and structural motions or wind fluctuations. The aerodynamic impulse functions are derived from experimentally measured flutter derivatives, ...

The effect of an increase in speed relative to the speed of sound on the unsteady flow round a harmonically oscillating aerofoil, is to increase the lag of the aerodynamic forces and moments behind the deflection when the frequency is small. It is shown theoretically that this will result in a serious deterioration of the damping of both the lateral oscillation and the high frequency longitudin...

Recent developments of the aerodynamics models for the comprehensive analysis CAMRAD II are described, particularly the unsteady aerodynamic models and dynamic stall models, and the free wake geometry calculation. Three models for the unsteady aerodynamic loads in attached flow are implemented: from incompressible thin-airfoil theory, from ONERA EDLIN, and from Leishman-Beddoes. Five dynamic st...

Abstract: Effects of aspect ratio, sweep angle, and stacking sequence of laminated composites were studied to find the optimized configuration of an aeroelastically tailored composite wing idealized as a flat plate in terms of flutter speed. The aeroelastic analysis has been carried out in frequency-domain. The 2D finite element analysis in conjunction with Doublet-lattice Method (DLM) has been...

Abstract This paper will discuss a method of bluff body noise control that utilises the phenomenon of aerodynamic interference. This technique uses a second body (not necessarily bluff) that is placed in the wake of the bluff body whose noise we wish to control. Through proper understanding of the wake dynamics, the amplitude and phase of the noise from the downstream body can be controlled so ...

The basis of this work was to understand the generation of lift and thrust of a flapping biwing ornithopter, which is influenced by its geometrical, dynamic, kinematic and aerodynamic features by following a generic approach in order to identify and mimic the mechanisms. As further development of earlier work, three-dimensional rigid thin wing is considered in flapping and pitching motion using...

This paper presents the aerodynamic design of low noise wind turbine blades using Betz and Joukowski concepts. The aerodynamic model is based on Blade Element Momentum theory whereas the aeroacoustic prediction model is based on the BPM model. The investigation is started with a 3MW baseline/reference turbine rotor with a diameter of 80 m. To reduce the noise emission from the baseline rotor, t...