A fuzzy logic controller of the heat recovery systems of cement clinker grate cooler is presented in this paper. The development and tests of the proposed fuzzy controller have been implemented in a cement plant in Guangdong, China. Cooling is performed by blowing fresh air underneath the grate cooler plate and heat recovery is obtained by outlet pipe extracting the hot air. However, continuous...

This paper describes an experimental investigation of the drying behavior and conditions of rosehip in a convective cyclone-type dryer. Drying experiments were conducted at air inlet temperatures of 50, 60 and 70 o C and air velocities of 0.5, 1 and 1.5 ms. The parametric values obtained from the experiments were fitted to the Newton mathematical models. Consequently, the drying model developed...

A simulation model for the CO2 heat pump water heater was developed and validated in this study. Component models of the gas cooler, evaporator, compressor, and expansion valve were constructed with careful consideration for the heat transfer performances. To validate the simulation model, experiments were carried out using an actual CO2 heat pump water heater (water heating capacity: 22.3 kW; ...

The effectiveness of a three-dimensional mixed-flow turbulence model describing airspeed and temperature distribution in a laboratory scale slot-ventilated chamber was evaluated. Airspeed and temperature profiles were investigated near the inlet jet region and along an axial line extending from the inlet. The observed jet-floor impingement location was accurately predicted^ with a maximum diffe...

Drying of green peas in a Fluidized Bed Dryer (FBD) with inert particle, heated by combined sources of hot air and InfraRed (IR) radiation, has been experimentally and theoretically studied. For this purpose, an experimental set up was constructed. This setup was composed of a cylindrical bed dryer containing some inert particles which are fluidized by hot air. Some infrared lamps were also pla...

in this study, the effect of the levels of hydrogen addition to methane-air premixed flame in a micro-stepped reactor has been studied numerically. in addition, the effects of mixture velocity and walls’ thermal conductivity (kw) on the flame’s location, temperature, and species distribution in a micro reactor were calculated using a 2d numerical laminar steady code. the results showed that an ...

to increase agricultural crops’ quality and to minimize losses in the final product and used energy during the drying process, major drying system parameters should be continuously controlled. precise control of such parameters is attained by using automatic control systems. to optimize the overall dryer efficiency in a forced convective solar dryer, a controller was designed, constructed a...

In sour gas flares,  content like any other components in inlet gas influences adiabatic flame temperature, which, in turn, impacts on the pollutant emission. Wherever flame temperature increases, the endothermic reaction between  and  is accelerated, which means higher  emission to the atmosphere. In this work, we developed an in-house MATLAB code to provide an environment for combustion calcu...

0016-2361/$ see front matter 2012 Elsevier Ltd. A doi:10.1016/j.fuel.2012.01.042 ⇑ Tel.: +90 262 3032285; fax: +90 262 3032203. E-mail address: [email protected] Homogeneous charge compression ignition (HCCI) combustion mode has some benefits compared to the most popular conventional combustion forms used in the internal combustion (IC) engines: spark ignition (SI) and compression igni...