In this paper, a recurrent fuzzy-neural network (RFNN) controller with neural network identifier in direct control model is designed to control the speed and exhaust temperature of the gas turbine in a combined cycle power plant. Since the turbine operation in combined cycle unit is considered, speed and exhaust temperature of the gas turbine should be simultaneously controlled by fuel command ...

A fluidized bed reactor with ultraviolet lamp and TiO2/silica photo-catalyst prepared in our laboratory was used as a photo-reactor to degrade toluene in a simulated toluene-air mixture. The effects of operating parameters including initial toluene concentration, superficial gas velocity, ultraviolet light intensity and catalyst bed height on degradation rate of toluene have been investigated i...

In this research the performance of a fluidized bed membrane reactor for high temperature water gas shift and its long term stability was investigated to provide a proof-of-concept of the new system at lab scale. A demonstration unit with a capacity of 1 Nm³/h of ultra-pure H₂ was designed, built and operated over 900 h of continuous work. Firstly, the performance of the membranes were investig...

Chemical Vapor Deposition (CVD) is one of the most important methods for producing Carbon Nanotubes (CNTs). In this research, a numerical model, based on finite volume method, is investigated. The applied method solves the conservation of mass, momentum, energy and species transport equations with aid of ideal gas law. Using this model, the growth rate and thickness uniformity of produced CNTs,...

We report a biolistic technology platform for physical delivery of particle formulations of drugs or vaccines using parallel arrays of microchannels, which generate highly collimated jets of particles with high spatial resolution. Our approach allows for effective delivery of therapeutics sequentially or concurrently (in mixture) at a specified target location or treatment area. We show this ne...

In situ non-intrusive measurements of water vapor partial pressure and temperature were performed simultaneously along two gas channels on he cathode side of a PEM fuel cell using tunable diode laser absorption spectroscopy. This measurement technique developed by us was utilized arlier to make measurements in a single bipolar plate channel of a prototype PEM fuel cell. The current study examin...

In this paper, model predictive control (MPC) strategy is implemented to a GE9001E gas turbine power plant. A linear model is developed for the gas turbine using conventional mathematical models and ARX identification procedure. Also a process control model is identified for system outputs prediction. The controller is designed in order to adjust the exhaust gas temperature and the rotor speed ...

application of cogeneration systems based gas turbine for heat and power production is increasing. because of finite natural energy resources and increasing energy demand the cost effective design of energy systems is essential. cgam problem as a cogeneration system is considered here for analyzing. two new approaches are considered, first in thermodynamic model of gas turbine and cogeneration ...

Liquid metal MHD (Magneto-Hydro-Dynamic) systems can be employed to produce electricity from a wide range of heat resources. In such a system, a low-boiling organic fluid and a high-temperature liquid metal fluid mix. The former evaporates, and carries the latter to flow through an MHD channel, where the electricity is generated. The mixing process and the gas-liquid flow characteristics will h...

In this paper a gas turbine power plant including air preheater (recuperator), heat recovery steam generator and air cooler system was modeled. Eight parameters were selected as the design variables.  Fast and elitist non-dominated sorting genetic algorithm (NSGA-II) was applied (to maximize the exergy efficiency and to minimize the total cost rate) for the mentioned cogeneration system. Th...