Abstract This paper deals with the influence of length moist curing period on development internal structure a paste based alkali-activated slag. Waterglass was used as activator. For purpose experiment, test specimens subjected to experiment were divided into five sets different regimes combining and air curing. The reference set kept in an environment relative humidity ≥ 95% during entire mat...

To reduce the labor cost and the workload required in the tobacco curing process, an intelligent tobacco curing control technique adopting color identification of the tobacco leaves is proposed. The HSI color space is used in color segmentation and the color recognition with fuzzy decision is used in the curing process. The curing controller can identify the curing stage by the color features o...

The effect of curing agent (6610) content and temperature on the rheological behavior of the epoxy resin CYD-128 was studied by DSC analysis and viscosity experiments. The results show that the resin system meets the requirements of processing technology. A complete reaction occurs when the curing agent content (40 parts per hundred resin, phr) is a little higher than the theoretical value (33....

Flue-curing is a post harvest conditioning process which strongly affects the tobacco leaf chemistry, and consequently the chemical properties of tobacco smoke. Several studies identified the major changes in tobacco chemistry occurring during flue-curing. It is not known how flue-curing contributes to changes in bioactivity of cigarette smoke condensate (CSC). In this study, tobacco leaves col...

This work describes an eeort to model the radio-frequency curing of epoxy adhesives in bonding of composites. We present a model based on the three-dimensional heat equation which includes nonlinear heat generating terms. A constructive proof of existence and uniqueness of solutions to our governing equations is given, providing a framework for the development of a computational method. Further...

Today concrete is most widely used construction material due to its good compressive strengt h and durability. Depending upon the nature of work the cement, fine aggregate, coarse aggregate and water are mixed in specific proportions to produce plain concrete. Plain concrete needs congenial atmosphere by providing moisture for a minimum period of 28 days for good hydration and to attain desired...

Objective: To assess a multiple emission peak light-emitting-diode (LED) light-curing unit (LCU) by measuring the polymerization efficiency through the degree of conversion (DC) and Knoop microhardness (KH) of a resin-based pit and fissure sealant at various light curing times and two distances compared to a single emission peak LED LCU. Method: Sixty disks of a resin-based pit and fissure seal...

We report a method for synthesizing various shaped colloidal microparticles using microfluidic devices with structured elastomeric membranes. These elastomeric membranes incorporated between two-layered channels have negative relief structures, and pneumatically actuated membrane leads to confinement of fluid inside structures. Using this microfluidic system, we demonstrate synthesis of various...

Various methods of toughening the bonding between the interleaf and laminate glass fiber reinforced polymer (GFRP) have been developed due to the increasing applications in industries. A polystyrene (PS) additive modified epoxy is used to improve the diffusion and precipitation region between polysulfone (PSU) interleaf and epoxy due to its influence on the curing kinetics without changing glas...

This study aimed to determine the feasibility of using optical coherence elastography to measure internal displacements during the curing phase of a light-activated, resin-based composite material. Displacement vectors were spatially mapped over time within a commercial dental composite. Measurements revealed that the orientation of cure-induced displacement vectors varied spatially in a comple...