gas mixing in a t-shape micro mixer has been simulated using the direct simulation monte carlo (dsmc) method. it is considered that the adequate mixing occurs when the mass composition of the species, co or n2, deviates below 1 % from their equilibrium composition. the mixing coefficient is defined as the ratio of the mixing length to the main channel’s height. as the inlet kn increases, while ...

UNLABELLED Accurate prediction of ventilation flow is of primary importance for designing a healthy, comfortable, and energy-efficient indoor environment. Since the 1970s, the use of computational fluid dynamics (CFD) has increased tremendously, and nowadays, it is one of the primary methods to assess ventilation flow in buildings. The most commonly used numerical approach consists of solving t...

the effects of temperature, time and the strategy of prepolymerization were studied on the morphology of polypropylene particles. propylene polymerization was carried out in slurry phase using 4th generation of ziegler-natta catalyst, cyclohexylmethyl dimethoxysilane as external electron donor, and triethyl aluminum as co-catalyst. prepolymerizations were carried out based on two strategies: is...

The influence of dose rate, i.e., ion flux, on ion beam mixing in Nb-Si bilayer samples was measured at room temperature and 325 °C. At the higher temperature, an increase in dose rate of a factor of 20 caused a decrease in the thickness of the mixed layer by a factor of 1.6 for equal total doses. At room temperature, the same change in flux had no effect on mixing. These results are consistent...

conclusions the analytical sensitivity of lamp and pcr methods, using the designed primers, was 8 times more than any other reported methods. the designed methods are specific and sensitive for detection of h. pylori in different clinical and environmental samples. results the detection limits of the lamp and pcr assay were similar and were 10 fg of pure dna of h. pylori, which is equal to 6 co...