This pilot study evaluates the surface roughness of monolithic zirconia crowns after chairside polishing by different dental practitioner groups. Four practitioner groups (group I: dental clinical students (n = 6); group II: dentists < 2 years post-qualification experience (n = 6); group III: dentists > 2 years post-qualification experience (n = 6) and group IV: dental technicians (n = 6)) were...

The optical polishing of hydrophilic polymer materials is a complex process that requires a comprehensive setting of various operating parameters. Based on a series of experimental investigations and dimensional analysis, this paper presents a simple empirical equation to evaluate material removal in the polishing of optical spherical surfaces of hydrophilic polymer materials. It is shown that ...

OBJECTIVE The purpose of this study was to evaluate the effects of different polishing techniques on the surface roughness of dental porcelains. MATERIAL AND METHODS Fifty-five cylindirical specimens (15x2 mm) were prepared for each feldspathic (Vita VMK 95, Ceramco III) and low-fusing dental porcelain (Matchmaker). Fifty-five specimens of machinable feldspathic porcelain blocks (Vitablocs Ma...

Polishing a die that has free-form surfaces is a time-consuming and tedious job, and requires a considerable amount of high-precision skill. In order to reduce the polishing time and cope with the shortage of skilled workers, a user-friendly automatic polishing system was developed in this research. The polishing system is composed of two subsystems, a three-axis machining center and a two-axis...

Aim: The study evaluated the efficiency of various finishing and polishing systems and the effect of finishing and polishing time by using various procedures on surface roughness and hardness of silorane based (FiltekP90) and methacrylate based (Z100) restorative materials. Method: The surface roughness and surface hardness were measured using a profilometer and Vickers hardness tester respecti...

The objective of this in vitro study was to evaluate the effects finishing protocols and oral hygiene procedures on surface mechanical properties CAD/CAM ceramics. Specimens (n = 96, (15x10x2mm) leucite glass-ceramic (LGC) feldspathic ceramic (FP) received polishing or glazing. Surface roughness (Ra) microhardness (VHN) were obtained with a profilometer hardness tester, respectively, before aft...

Diamond is one of the hardest and most difficult to polish materials. In this paper, the polishing of {111} and {100} single crystal diamond surfaces by standard chemical mechanical polishing, as used in the silicon industry, is demonstrated. A Logitech Tribo Chemical Mechanical Polishing system with Logitech SF1 Syton and a polyurethane/polyester polishing pad was used. A reduction in roughnes...

Through the polishing experiments of potassium dihydrogen phosphate (KDP) crystals based on deliquescent action, the effect of several major factors, including crystal's initial surface state, polishing time, and revolution of polishing plate, on material removal was researched. Under certain experimental conditions, the rules of material removal were reached, and experimental results are discu...

In this article, a furniture polishing robot, which uses a trajectory generator based on cutter location data, is proposed. The position and orientation of the polishing tool is suitably controlled by referring the output from the trajectory generator. The trajectory generator yields a zigzag path, whirl path or their combinational path according to the shape of each workpiece. Using the trajec...