High power chemical lasers often have high aspect ratio gain regions, for which an unstable resonator with different magnifications in the two transverse dimensions is desirable. This paper considers a new class of unstable resonators which achieves the differential magnification property with spherical mirrors by suitably tilting the mirrors through large angles. Output optical quality has bee...

in this paper, using annular resonator we have designed an adding and dropping filter light based ontwo-dimensional photonic crystals. the shape of ring resonator filter adding and dropping that wehave proposed is race track. this filter has a hexagonal lattice structure of silicon bars withrefractive index 3/46 that is located in the context of air with refractive index 1. transmissionefficien...

Ahstruct-We preseni a formalism for analyzing laser resonators which possdss nonplanar mirrors and iateral waveguiding [e.g., an unstable resonator semiconductor laser (URSL)]. The electric field is expdnded iii lateral modes of the complex-iridex waveguide and is required to rbproduce itself after, one roundtrip of the cavity. We show how the waveguide modes, their gain and loss, and hence the...

This paper continues the discussion of the detailed experimental study conducted on adaptive optical control methodologies inside a laser resonator.(1) In this paper we discuss the experimental results for the correction of tilt within a laser resonator utilizing a multidither zonal COAT system. The tilt aberration was introduced in three different ways: (1) static tilt was introduced while the...

We report on a simple method of locking a laser to a birefringent cavity using polarization spectroscopy. The birefringence of the resonator permits the simple extraction of an error signal by using one polarization state as a phase reference for another state. No modulation of the light or the resonator is required, reducing the complexity of the laser locking setup. This method of producing a...

We report the first demonstration to our knowledge of broadly tunable, single-frequency operation of a cw Cr:YAG laser. Single-frequency operation was obtained from 1332 to 1554 nm with a maximum output power of 680 mW generated at 1457 nm with 10% conversion efficiency of 1047-nm pump laser radiation. A traveling-wave ring resonator was forced to operate unidirectionally by use of Faraday rota...

Optomechanics may be viewed as a light-mechanics interface to realize hybrid structures for (classical or quantum) information processing, switching or storage. Using the two-laser technique, in this paper, we theoretically devise a protocol for quantum light memory via a cavity optomechanical system composed of a Fabry–Perot cavity and a mechanical resonator. Due to the long-lived mechanical r...

We describe the operating characteristics of a new type of quantum oscillator that is based on a two-photon stimulated emission process. This two-photon laser consists of spin-polarized and laser-driven 39K atoms placed in a high-finesse transverse-mode-degenerate optical resonator and produces a beam with a power of approximately 0.2 microW at a wavelength of 770 nm. We observe complex dynamic...

Doped and undoped silica slabs were fabricated through the use of the sol-gel technique. Extended UV transmission was observed for HCl-catalyzed sol-gel silica. Under transverse pumping with a XeCl laser, narrow-linewidth (<0.9-nm) laser oscillation from silica slabs doped with coumarin 460 (C460) was achieved in a grating-resonator cavity configured in the grazing-indicence geometry. Tuning of...

The paper discusses the processes that determine the parasitic heat generation and its distribution in the solid-state laser materials. It is inferred that the balance between the laser emission and heat generation is determined by the characteristics of the pumping system and by the partial efficiencies of the various steps of the flow of excitation between the energy levels of the laser mater...