AIMS The aim of this in vitro study was to evaluate the influence of light curing modes and curing time on the microhardness of a hybrid composite resin. METHODS AND MATERIALS Forty-five Z250 composite resin specimens (3M-ESPE Dental Products, St. Paul, MN, USA) were randomly divided into nine groups (n=5): three polymerization modes (conventional-550 mW/cm2; light-emitting diodes (LED)-360 m...

The purpose of this study was to determine any discrepancies in the outputs of five commercial dental radiometers and also to evaluate the accuracy of these devices using a laboratory-grade spectroradiometer. The power densities of 12 different curing light sources were repeatedly measured for a total of five times using each radiometer in a random order. The emission spectra of all of the curi...

PURPOSE Adequate polymerization is a crucial factor in obtaining optimal physical properties and a satisfying clinical performance from composite resin materials. The aim of this study was to evaluate the polymerization efficiency of dual-cure resin cement cured with two different light curing units under zirconia structures having differing thicknesses. MATERIALS AND METHODS 4 zirconia discs...

PURPOSE To evaluate the degree of conversion (DC) of dual-curing materials used to lute glass-fiber posts in a simulated root canal polymerized by two different modalities. METHODS Artificial root canals were used to simulate a clinical condition to lute 45 posts by three different dual curing luting cements (Calibra, Multilink Automix and Variolink II). Two light cure modalities were chosen ...

Today proper selection of dental cements is a key factor to achieve a successful restoration and will greatly increase the chances of long-term success of the restoration. In recent years, many newly formulated dental cements have been developed with the claim of better performance compared to the traditional materials. Unfortunately, selection of suitable dental cement for a specific clinical ...

PURPOSE To evaluate the curing depth and compressive strength of dental composite using halogen light curing unit and light emitting diode light curing unit. MATERIALS AND METHODS Eighty cylindrical composite specimens were prepared using posterior composite P60(3M). Forty specimens, out of which 20 samples (group A) cured with halogen light and 20 samples (group B) cured using light emitting...

OBJECTIVE The aim of this study was to investigate the in-vitro marginal adaptation of all-ceramic class II inlays which were luted with conventional multi-stage pre-treatment cements and one new type of cement, which requires no conditioning. METHODS The marginal adaptation of 56 all-ceramic inlays was determined with scanning electron microscopy and microleakage tests. The marginal integrit...

OBJECTIVES Besides the fixation of the restoration, an important function of dental luting cements is to seal the gap between tooth and restoration. However, as a result of adhesion, curing contraction is hindered, creating stresses. To maintain the seal these stresses neither exceed the bond nor the cohesive strength of the cement. The aim of this study was to evaluate a rather simple model, w...

statement of problem: there are controversial reports regarding physical and mechanical properties of resin composites and glass ionomer cements. some revealed higher strength and hardness for resin composites while others showed a comparable value for glass ionomer cements. evaluation of mechanical properties of different types of resin composites in comparison with resin modified glass ionome...

PURPOSE To prevent contamination of the light guide on a dental curing light, barriers such as disposable plastic wrap or covers may be used. This study compared the effect of 3 disposable barriers on the spectral output and power density from a curing light. The hypothesis was that none of the barriers would have a significant clinical effect on the spectral output or the power density from th...