The fragility of buried electrical cables is often neglected in earthquakes but significant damage to cables was observed during the 2010–2011 Canterbury earthquake sequence in New Zealand. This study estimates Poisson repair rates, similar to those in existence for pipelines, using damage data retrieved from part of the electric power distribution network in the city of Christchurch. The funct...

The evaluation of liquefaction effect on the dynamic moment of stabilizing piles is potentially significant. Based on the dynamic centrifuge modeling of a slope reinforced with a row of copper model pile, this paper not only analyzed the response of dynamic pore pressure, earthquake deformation and macroscopic phenomenon measured in the response of the reinforced slope, but also simulated the r...

Hydrothermal liquefaction (HTL) of microalgae Nannochloropsis (NAS) over various transition metal M/TiO2 (M = Fe, Co, Ni, Mo, and Mn) was investigated. Ni/TiO2 was the most effective catalyst to improve the yield and quality of biocrude and the liquefaction conversion. Ni/TiO2 was characterized by XRD, XRF, and XPS. The research of Effect of reaction temperature on HTL of NAS over Ni/TiO2 sugge...

In this paper, assessment of liquefaction of soils by various approaches have been reviewed and presented in chronological order. The study focuses on procedural requirements and assessment for conventional and computational methods. Simplified method given by Seed, Tokimatsu-Yoshimi (T-Y) and Idriss & Boulanger methods of liquefaction assessmenthave been analyzed. Computational methods like ar...

Response surface methodology (RSM) was used to optimize the microwave-assisted direct liquefaction of Sargassum polycystum C.Agardh in ethylene glycol (EG) with H(2)SO(4) as a catalyst. Based on the results of single factor experiments, EG-to-feedstock ratio, temperature and catalyst content were chosen as independent variables for a central composite rotatable design (CCRD). The optimal liquef...

in this paper, we are going to improve the energy efficiency of an industrial c 3 mr base load lng plant by changing its refrigerant components and its mole fractions in liquefaction and subcooling cycles based on the cooling curves generated in the main liquefaction and subcooling heat exchangers. later on, selection features of the elements will be discussed. first, non-optimized c 3 mr plant...

Engineering practitioners commonly use penetration-based methods (SPT & CPT) for assessment of seismic liquefaction triggering hazard. On the horizon, shear wave velocity (Vs) may offer engineers a third tool that is lower cost and provides more physically meaningful measurements. Development of the shear wave velocity liquefaction method has been hampered by a paucity of published velocity pro...

The post-coital test evaluates the penetration of spermatozoa into cervical mucus; it relies on subjective measurements and therefore lacks precision. Enzymatic liquefaction of cervical mucus allows sperm concentration to be measured in post-coital test samples, but the reliability of such measurements is not known. Donor cervical mucus was used as a model to test the accuracy and sensitivity o...

On February 27, 2010, the central-south part of Chile was affected by a strong ground motion of Magnitude 8.8, that induced moderate values of peak ground acceleration (PGA) on rock outcrops, in the range of 0.13g to 0.32g, while in soil deposits, a maximum PGA of 0.94g was recorded. The duration of the shaking was close to two minutes as it is substantiated by the available acceleration record...

A supercritical hydrogen liquefaction cycle is proposed and analyzed numerically. If hydrogen is to be used as an energy carrier, the efficiency of liquefaction will become increasingly important. By examining some difficulties of commonly used industrial liquefaction cycles, several changes are suggested and a readily scalable, supercritical, helium-cooled hydrogen liquefaction cycle is propos...