In the plastic molding industry, plastic parts like pager and handphone cases, plastic containers, etc. are formed in a mold by applying temperature and pressure. The transfer molding is the standard workhorse for the electronics industry. Although the transfer molding is widely used, it is far from being optimized. Mold sticking is a serious practical problem in this industry. A solution to th...

In this study, Inconel 718 coatings were deposited by the high-pressure cold spray technique, and post-process solution double aging treatments conducted. The microstructures of as-deposited heat-treated IN718 analyzed, their mechanical properties tested. It was found that micro-dendritic structures in original powder severely elongated coating due to plastic deformation during process. After h...

Nanosized TiO2 particles were prepared by sol–gel method. The TiO2 particles were co-deposited with chromium using electrodeposition technique. In investigating of coating surfaces by scanning electron microscope (SEM), the results showed that the morphology of the coating surface was changed by adding TiO2 nanoparticles to the chromium coating. The corrosion behavior of the coatings was assess...

Hydroxyapatite (HA) is one of the most commonly used materials for the coating of bioceramic titanium (Ti) alloys. However, HA has poor mechanical properties and a low bonding strength. Accordingly, the present study replaces HA with a composite coating material consisting of fluorapatite (FA) and 20 wt % yttria (3 mol %) stabilized zirconia (ZrO₂, 3Y-TZP). The FA/ZrO₂ coatings are deposited on...

The present contribution has originated from a critical biomedical engineering issue e.g., loosening of metallic prostheses fixed with poly(methyl methylacrylate) (PMMA) bone cement especially in the case of hip joint replacement which ultimately forces the patient to undergo a revision surgery. Subsequently surgeons invented a cementless fixation technology introducing a bioactive hydroxyapati...

When a drop containing colloidal particles evaporates on a surface, a circular stain made of these particles is often observed due to an internal flow toward the contact line. To hinder this effect, several approaches have been proposed such as flow modification by addition of surfactants or control of the interactions between the particles. All of these strategies involve the liquid phase whil...

In the present study, Ta coatings with a thickness of 1.7 and 4.2 μm were deposited on Ti samples through reactive magnetron sputtering. The are furthermore treated by scanning electron beam in order to form Ti-Ta surface alloy. A change phase composition alloy was observed X-ray diffraction (XRD). microstructure chemical studied via microscopy (SEM) energy-dispersive spectroscopy (EDX). result...

Pd+Zr and Pd+Hf co-doped aluminide coatings were deposited on the Mar-M247 nickel superalloy by palladium electroplating followed zirconizing-aluminizing or hafnizing-aluminizing processes. Both consisted of two zones, outer interdiffusion one build ?-(Ni,Pd)Al phase. Hafnium zirconium formed inclusions that precipitated at border zones close to surface (only in Zr+Pd modified coating). Oxidati...