The two-way shape memory effect in a Ti36Ni49Hf15 high temperature shape memory alloy (SMA) has been systematically studied by bending tests. In the TiNiHf alloy, the martensite deformation is an effective method to get two-way shape memory effect even with a small deformation strain. When the TiNiHf alloy is deformed at a full martensite state, the deformation mechanism is the martensite orien...

Pseudoelasticity and the shape memory e ect (SME) due to martensitic transformation and reorientation of polycrystalline shape memory alloy (SMA) materials are modelled using a free energy function and a dissipation potential. Three di erent cases are considered, based on the number of internal state variables in the free energy: (1) Austenite plus a variable number of martensite variants; (2) ...

Utilizing electrical resistance measurements in combination with strain observations on single crystals, it was possible to distinguish the austenite to martensite transformation from the detwinning of the martensite behavior during deformation of NiTiCu shape memory alloys. It was found that the electrical resistance change associated with the detwinning of the martensite variants was as high ...

Stress-induced martensitic transformations are clarified in classes of NiMnGa alloys which undergo the stress-free, thermal-induced inter-martensite transformation austenite (A) pre-martensite (PM) martensite. This study implements a comprehensive experimental approach, including analysis of the strain–temperature and stress–strain response, which discloses stress-induced inter-martensite trans...

Calculations verify that carbon diffusion may occur during the lath martensite fomtion. Accordingly,the diffusion of int2rstitial ator ions must be taka into account nhfn martmitic transformtion is defined as a diffusionless transformation. In derivation of the kinetics equation of the ath& martensitic transfomtion,rzgardng the c a r h diffusion, i .e.the enrichment of the austenite during the ...

The aim of this study was to investigate the effect of thermomechanical treatment on mechanical and metallurgical properties of nickel-titanium (NiTi) rotary instruments. Eight kinds of NiTi rotary instruments with sizes of ISO #25 were selected: ProFile, K3, and One Shape for the conventional alloy; ProTaper NEXT, Reciproc, and WaveOne for the M-wire alloy; HyFlex CM for the controlled memory-...

In this study, the combined effects of strengthening, precipitates, and textures on the shape recovery ability and superelasticity of thermomechanically treated Ti49.3Ni50.7 shape memory alloy (SMA) in both the rolling and transverse directions were studied by experimental measurements and theoretical calculations. Experimental results and theoretical calculations showed that the 300 °C × 100 h...

dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500c. stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500c, and smooth flow at the other temperatures. both yield and ultimate tensile strengths increased with increasing testing temperature up to about 4500c and then decreased at h...