Aluminum Matrix composites (AMCs) are light weight, high-strength materials with potential application in areas such as automobile, aerospace, defence, engineering and other industries. AMCs are projected to significantly reduce the overall weight of the vehicles and aircraft while maintaining satisfactory structural strength. Reinforcement of micron or nano-sized range particles with aluminium...

The compressive response of polymer matrix fiber reinforced unidirectional composites (PMC’s) is investigated via a combination of experiment and analysis. The study accounts for the nonlinear constitutive response of the polymer matrix material and examines the effect of fiber geometric imperfections, fiber mechanical properties and fiber volume fraction on the measured compressive strength an...

To improve the interfacial bonding of sisal fiber reinforced polylactide biocomposites, polylactide (PLA) and sisal fibers (SF) were melt-blended to fabricate bio-based composites via in situ reactive interfacial compatibilization with the addition of an epoxy-functionalized oligomer (ADR). The FTIR analysis and SEM characterization demonstrated that PLA molecular chain was bonded to the fiber ...

in recent years the aluminum matrix composites are gaining wide spread applications in automotive, aerospace, defense, sport and other industries. the reason for this is their exciting properties like high specific strength, stiffness, hardness, wear resistance, dimensional stability and designer flexibility. the present work reports on mechanical properties and microstructure analysis of al-si...

CoTiO3-clay nano-composites were synthesized via a conventional sol-gel method; the gel was calcinated at 500 - 800°C for 2 hours. The presence of rhombohedra phase of CoTiO3 in clay matrix was confirmed by XRD, FTIR, SEM. Cobalt titanate-clay nano-composites were prepared with 5-20%(w/w) by sol-gel method. The spectra results were investigated at 20% (w/w) concentration .The optimum condition ...

ozone modification method and air-oxidation were used for the surface treatment of polyacrylonitrile(pan)-based carbon fiber. the surface characteristics of carbon fibers were characterized by x-ray photoelectron spectroscopy (xps). the interfacial properties of carbon fiber reinforced polyamide 6 (cf/pa6) composites were investigated by means of the single fiber pull-out tests. as a result, it...

Nanoparticles with sizes ranging between objects and microparticles (e.g. atom) have attracted much attention. These particles with various specialized functions not only deepen our understanding of nature, but also serve as the basis for the development of new advanced technology. The successful application of nanoparticles depends upon both the synthesis and the surface modification of these ...

Brass-matrix composites reinforced with 40 and 60 vol.% of Ni59Zr20Ti16Si2Sn3 glassy particles were produced by powder metallurgy. The crystallization behavior and the temperature dependence of the viscosity of the glass reinforcement were studied in detail to select the proper sintering parameters in order to avoid crystallization of the glassy phase during consolidation. The brass-glass powde...

Thermal behaviors of wheat straw flour (WF) filled thermoplastic compositeswere measured applying the thermogravimetric analysis and differential scanningcalorimetry. Morphology and mechanical properties were also studied using scanningelectron microscope and universal testing machine, respectively. Presence of WF inthermoplastic matrix reduced the degradation temperature of the composites. One...

In-situ TiB whisker-reinforced Ti-6Al-4V (TC4) titanium matrix composites (TiBw/TC4) with quasi-continuous networks were successfully fabricated by vacuum hot-pressing sintering. The effects of the hot-hydrostatic canned extrusion on stock utilization, microstructure and mechanical properties of the TiBw/TC4 composites were investigated. It was satisfactory that the utilization of composites co...