A methanol microsensor integrated with a micro heater manufactured using the complementary metal oxide semiconductor (CMOS)-microelectromechanical system (MEMS) technique was presented. The sensor has a capability of detecting low concentration methanol gas. Structure of the sensor is composed of interdigitated electrodes, a sensitive film and a heater. The heater located under the interdigitat...

RFID, as a low cost technology with a long life time, provides great potential for transmitting sensor data in combination with the ordinary ID number. The sensor can, for example, be integrated either in the chip or in the antenna of an RFID tag. This thesis focuses on the design of antenna-based UHF RFID sensor tags as wireless sensors at the lowest possible cost level compatible with standar...

This work presents two current-mode integrated circuits designed for sensor signal preprocessing in embedded systems. The proposed circuits have been designed to provide good signal transfer and fulfill their function, while minimizing the load effects due to building complex conditioning architectures. The processing architecture based on the proposed building blocks can be reconfigured throug...

In this work, a design of wireless system for multi-sensors monitoring has been presented. The main purpose of this research is to develop an efficient telemetry system for measuring water pressure and temperature signals. The system reads data from two types of sensors, temperature (resistive) and pressure (capacitive). Anderson circuit configuration has been used for the resistive sensor, sin...

In this work, methane detection is performed on the 2ν(3) and ν(2) + 2ν(3) absorption bands in the Near-Infrared (NIR) wavelength region using an all-fibre optical sensor. Hollow-core photonic bandgap fibres (HC-PBFs) are employed as gas cells due to their compactness, good integrability in optical systems and feasibility of long interaction lengths with gases. Sensing in the 2ν(3) band of meth...

Spintronics is a continuously expending area of research and development at the merge between magnetism and electronics. It aims at taking advantage of the quantum characteristic of the electrons, i.e. its spin, to create new functionalities and new devices. Spintronic devices typically rely on the Magneto Resistive (MR) effects, which consists in a dependence of the electrical resistance upon ...

The levels of dissolved sulfate and methane are crucial indicators in the geochemical analysis of pore water. Compositional analysis of pore water samples obtained from sea trials was conducted using Raman spectroscopy. It was found that the concentration of SO42- in pore water samples decreases as the depth increases, while the expected Raman signal of methane has not been observed. A possible...

ZnO and ZnO: Mn nanocrystals were synthesized via reverse micelle method. The structural properties of nanocrystals were investigated by XRD. The XRD results indicated that the synthesized nanocrystals had a pure wurtzite (hexagonal phase) structure. Resistive gas sensors were fabricated by providing ohmic contacts on the tablet obtained from compressed nanocrystals powder and the installation ...

We have designed, fabricated, and tested a new type of thermal shear-stress sensor. The sensor consists of a 2 m wide polysilicon thermistor (with a range of lengths, 80-200 m) on a 1.2 m thick silicon-nitride diaphragm, which is on top of a vacuum cavity 200 200 2 m in size. The vacuum cavity provides a good thermal isolation between the resistive element and the substrate; shear-stress sensit...

We present a deep convolutional neural network which is capable to distinguish between different contact states in robotic manipulation tasks. By integrating spatial and temporal tactile sensor data from a piezo-resistive sensor array through deep learning techniques, the network is not only able to classify the contact state into stable versus slipping, but also to distinguish between rotation...