Carbon nanotubes are being used in place of carbon fibers in making composites due to their high strength, high aspect-ratio and excellent thermal and electrical conductivity. Although carbon nanotubes were discovered more than a decade ago, works on preparation of satisfactory composites reinforced by carbon nanotubes have encountered difficulties. This review will discuss some registered pate...

Nano-silicon-based disordered carbon composites prepared by mechanical milling and pyrolysis have been examined as anodes of a lithium ion cell. Electrochemical measurements show that the charge–discharge capacity of disordered carbon composites incorporating both silicon-polyparaphenylene (Si-PPP) and silicon-polyvinyl chloride (Si-PVC) with differing silicon contents, decreases with increasin...

Polymer/cholesteric liquid crystal (ChLC) nano-composites consisting of mesogenic monomers and LCs have nano-sized LC domains dispersed in an anisotropic polymer matrix. They exhibit characteristics not observed in conventional ChLCs, such as sub-millisecond and “deformation-free” electro-optic tuning of the selective reflection band; however, their driving voltage is high compared to conventio...

The main aim of this research was to find the mechanism for the failure of the CoCrMo porous nano-composite by characterizing microstructural changes and fractured surface after compression test. For this purpose, porous nano-composites were prepared with the addition of bioactive glass nano-powder to Co-base alloy with 22.5% porosity by the combination of space-holder and powder metallurgy tec...

To improve the electromagnetic characteristics of conductive nano fillers, carbon nanofibers (CNFs) with nickel-phosphorous (Ni-P) and nickeliron (Ni-Fe) have been fabricated by the electroless plating process. Observations by the electron microscopy (SEM/TEM) and element analyzer (EDS/ELLS) showed the uniform Ni-P and Ni-Fe coated CNFs. The compositions of the plating layers were about Ni-6wt%...

polyamide-66(pa66)/caco3 micro- and nano-composites were prepared using a polymer solution method at filler loading of 0, 1, 2 and 3 weight percent. nano-size of caco3 was synthesized by micro-emulsion technique. the material was characterized by xrd, sem, ftir and uv-vis techniques. xrd results of composites suggested that caco3 particles are found in the amorphous phase of the semi-crystallin...

ZrB₂-based nanocomposites with and without carbon nanotubes (CNTs) as reinforcement were prepared at 1600 °C by spark plasma sintering. The effects of CNTs on the microstructure and mechanical properties of nano-ZrB₂ matrix composites were studied. The results indicated that adding CNTs can inhibit the abnormal grain growth of ZrB₂ grains and improve the fracture toughness of the composites. Th...

Metal matrix-impregnated diamond composites are widely used in diamond tool manufacturing. In order to satisfy the increasing engineering requirements, researchers have paid more and more attention to enhancing conventional metal matrices by applying novel methods. In this work, ZrO₂ nanoparticles were introduced into the WC-bronze matrix with and without diamond grits via hot pressing to impro...

A combination of reinforcements at different levels can have a synergetic effect on the final properties of a composite. The aim of this work was to produce, evaluate, and compare the wet/dry cycling durability of the exposure of cement composites reinforced with conventional pulps at the micro-scale level, with nanofibrillated cellulose fibers at the nano-scale level, and with combinations of ...