This paper looks at the differences in dielectric response between epoxy resin composites with conventional and nanoscale alumina filler. Host material, namely bisphenol-A epoxy resin, is the same for all samples. Preparation of the samples is described in detail. Both filler types are treated in similar fashion to ensure comparability of the results. An even distribution of the alumina in case...

Advances in nanotechnology have provided acoustic researchers with a number of new materials with nano-fibres and nano-pores that can potentially be implemented as an acoustic porous absorber. This paper investigates the acoustic absorption behaviour of carbon nanotube (CNT) arrays, in order to quantify the acoustic characteristics and absorption performance of nanoscopic fibres in comparison w...

Nano-layered sorbents for CO(2) capture, for the first time, were developed using layer-by-layer nanoassembly. A CO(2)-adsorbing polymer and a strong polyelectrolyte were alternately immobilized within porous particles. The developed sorbents had fast CO(2) adsorption and desorption properties and their CO(2) capture capacity increased with increasing nano-layers of the CO(2)-adsorbing polymer.

Three-component organic/inorganic hybrid films were fabricated by drop-casting the mixed dispersion of nanodispersed-poly(nickel 1,1,2,2-ethenetetrathiolate) (nano-PETT), polyimide (PI) and super growth carbon nanotubes (SG-CNTs) in N-methylpyrrolidone (NMP) at the designed ratio on a substrate. The dried nano-PETT/PI/SG-CNT hybrid films were prepared by the stepwise cleaning of NMP and methano...

We report a simple method to fabricate nano-porous tantalum oxide films via anodization with Ta foils as the anode at room temperature. A mixture of ethylene glycol, phosphoric acid, NH4F and H2O was used as the electrolyte where the nano-porous tantalum oxide could be synthesized by anodizing a tantalum foil for 1 h at 20 V in a two-electrode configuration. The as-prepared porous film exhibite...

We report a simple strategy for the creation of large-area nanoporous hybrid films of silica, carbon, and gold on polyethylene terephthalate via photothermal processing. This method enables the selective heating of light-absorbing thin films on low-temperature substrates using submillisecond light pulses generated by a xenon flash lamp. The film contains gold nanoparticles as the nano-heaters t...

Nano-bioapatite (BAP) powder was successfully acquired from chicken femur bones via chemical treatment followed by calcination. The isolation of nano-bioapatite powder from chicken bone has not been published so far. The bioapatite powder was chemically and structurally characterized by elemental analysis (AAS), X-ray diffraction (XRD), transmission electron microscopy (TEM), and Fourier transf...

Recently the applications of functionalized magnetic nano particles are increased in a linear fashion. This is due to the ease of synthesis and controlled growth of magnetic nano particles. In the present investigation gentamicin drug functionalized Fe3O4 nanoparticles were synthesized by co-precipitation method. Thus obtained nano hybrid was characterized by Fourier transform infrared (FTIR) s...

Nano-porous silicon were simply prepared from p-type single crystalline silicon wafer by electrochemical etching technique via exerting constant current density in two different HF-Ethanol and HF-Ethanol-H2O solutions. The mesoporous silicon layers were characterized by field emission scanning electron microscopy and scanning electron microscopy. The results demonstrate that the width of nano-p...

⎯ A new micromachining method to fabricate wafer scale, atomically smooth nano-membranes is described. The delicate membrane is supported on a robust silicon microsieve fabricated by plasma etching. The supporting sieve is micromachined independently of the nano-membrane, which is later fusion bonded to it. The transferred thin-film membrane can be dense, porous or perforated according to the a...