Linear sweep voltammetry has been used as an “in situ” technique to characterize thin layers of ZnNi alloys. The zinc dissolution peak potentials from ZnNi deposits were found to be more noble [El,= -0.7V (SCE) and Ez,= -0.575 V (SCE)] than those of the pure metal ions [-OX3 V (SCE)] due to a formation of two ZnNi intermediate phases 7 and 6 respectively. The effect of d c and pulse parameters ...

Reticulated mesh samples of Co-29Cr-6Mo alloy and Ni-21Cr-9Mo-4Nb alloy (625) and stochastic foam samples of Co-29Cr-6Mo alloy fabricated by electron beam melting were characterized by optical metallography, and the dynamic stiffness (Young's modulus) was measured by resonant frequency analysis. The relative stiffness (E/Es) versus relative density (ρ/ρs) plotted on a log-log basis resulted in ...

An economic and effective Pt-based alloy cocatalyst has attracted considerable attention due to their excellent catalytic activity and reducing Pt usage. In this study, PtNi alloy cocatalyst was successfully decorated on the g-C3N4/GO hybrid photocatalyst via a facile chemical reduction method. The Eosin Y-sensitized g-C3N4/PtNi/GO-0.5% composite photocatalyst yields about 1.54 and 1178 times h...

An overview will be given of some recent results of microstructural electron microscopy studies on martensitic systems. The precursor structure observed in a ternary Ni-Mn-Ti alloy and its correlation with the ensuing stacking sequence is presented. New types of materials of a well known alloy, in casu splat-cooled and nanoscale thin films of Ni-A1 are investigated revealing particular morpholo...

Two major areas of effort are encompassed: I. New Techniques for the Synthesis of Metals and Alloys The High Rate Physical Vapor Deposition (HRPVD) process is to be used for the following: 1. Preparation and characterization of Ni and Ni-20Cr alloy sheet 2. Synthesis of compounds Y-O., TiC, Si^N, by reactive evaporation and their characterization 3. Dispersion strengthened alloys, Ni-ZOCr-Y-O ,...

A commercial plasma enhanced chemical vapor deposition (PECVD) technique with planetary substrate rotation was used to apply a thin (200-400 nm thick) conformal diamond-like carbon (DLC) coating (known as a diamond-like nanocomposite (DLN)) on LIGA fabricated Ni-Mn alloy parts. The PECVD technique is known to overcome the drawbacks associated with the line-of-sight nature of physical vapor depo...

The start of melting as well as the melting range in WC-Co and WC-Ni hardmetals is significantly influenced by the alloy gross carbon content as well as by additives (V, Cr). Both Vanadium and Chromium significantly lower the start of melting but also broaden the melting range, in particular at low carbon content (formation of M6C-phases). As a result, a certain temperature range can be defined...

Freestanding Si-Ti-Ni alloy particles/reduced graphene oxide/single wall carbon nanotube composites have been prepared as an anode for lithium ion batteries via a simple filtration method. This composite electrode showed a 9% increase in reversible capacity, a two-fold higher cycle retention at 50 cycles and a two-fold higher rate capability at 2 C compared to pristine Si-Ti-Ni (STN) alloy elec...

Ni-Fe alloy/ZnO nanorod composites were fabricated and the magnetoelectric effect was demonstrated. The ZnO and Ni-Fe alloy serve as the piezoelectric phase and the magnetostrictive phase in the nanocomposite, respectively. Since the nanorod structure possesses the inherent nature of a large surface-to-volume ratio, it greatly enhances the interplay between the piezoelectric and magnetostrictiv...

Surface modification with oxide nanostructures is one of the efficient ways to improve physical or biomedical properties of shape memory alloys. This work reports a fabrication of highly ordered Ti-Ni-O nanotube arrays on Ti-Ni alloy substrates through pulse anodization in glycerol-based electrolytes. The effects of anodization parameters and the annealing process on the microstructures and sur...