As typical anchorage-dependent cells myocytes must balance contractility against adequate adhesion. Skeletal myotubes grown as isolated strips from myoblasts on micropatterned glass exhibited spontaneous peeling after one end of the myotube was mechanically detached. Such results indicate the development of a prestress in the cells. To assess this prestress and study the dynamic adhesion streng...

The paper considers the method of computer simulation stress-strain state drive drum shell in NASTRAN integrated environment. Due to complexity determining stresses and deformations sections by analytical method, it is proposed solve this important problem using numerical finite-element method. At preliminary stage modeling, a mechanical design scheme was developed, including variable pressure ...

An isothermal boundary layer analysis is presented for the convection flow of a second-order non-Newtonian fluid past a two-dimensional wedge embedded in a non-Darcian porous medium in the presence of significant thermal radiation, surface transpiration and Eckert viscous heating. Nonsimilar numerical solutions are generated for the shear stresses and local heat transfer rates at the surface of...

As waves travel and shoal towards a beach, their surface elevation becomes peaky (sharp crests) and asymmetric relative to the vertical. Within a wave period, the corresponding orbital velocity near the bottom shows a similar (time) variation and it is recognized that these nonlinearities are responsible for sediment transport. The resulting wave-induced bottom shear stresses are required for m...

The stability evaluation of the slope commonly uses limit equilibrium methods, for example, Fellenius’ method in Japan. The limit equilibrium methods have two limitations. (1) It is necessary to divide the sliding mass into slices, and to set up some additional equations to make the problem statically determinate. (2) It is necessary to search sliding surface with a minimum safety factor. Shear...

A physical model of gabion overflow dams was studied to determine the velocity profile and Reynolds shear stress. Physical tests were done under two different conditions of dam crest, overflow dams with impermeable and with permeable crests. Instantaneous velocity components over dam crest were measured by an ADV (Acoustic Doppler Velocimeter) instrument. This instrument is capable of measuring...

Loading a specimen as shown in Figure 1a produces shear stresses in the material. An initially square element of the material, having vertical sides parallel to the direction of loading, is distorted by these stresses into a diamond shape as illustrated in Figure 1b, where the distortion is greatly exaggerated for pictorial clarity. Shear strain is defined as the magnitude of the change in the ...