The vitrification of an hazardous iron-rich waste (W), arising from slag flotation of copper production, was studied. Two glasses, containing 30wt% W were melted for 30min at 1400 degrees C. The first batch, labeled WSZ, was obtained by mixing W, blast furnace slag (S) and zeolite tuff (Z), whereas the second, labeled WG, was prepared by mixing W, glass cullet (G), sand and limestone. The glass...

Many properties of porous calcium phosphate ceramics have been described, but how pore size influences bony integration of various porous ceramics remains unclear. This study was performed to quantify the bony ingrowth and biodegradability of two porous calcium phosphate ceramics with four different pore size ranges (45-80 microm, 80-140 microm, 140-200 microm, and 200-250 microm). Hydroxyapati...

Eu(3+)-doped transparent glass ceramics containing In(2)O(3) nano-crystals were prepared by melt quenching and subsequent heating. X-ray diffraction analysis, transmission electron microscope observation, and photoluminescence excitation spectra demonstrated that In(2)O(3) nano-particles sized 3-6 nm homogenously distributed among the glass matrix. Under excitation of these nano-particles, Eu(3...

The surface reactivity of different sets of glasses and glass-ceramics belonging to the SiO2–P2O5– CaO–MgO–K2O–Na2O system have been investigated. The attention was focused on the role of their composition on the bioactivity kinetics, in terms of pH modifications, silica-gel formation and its evolution toward hydroxycarbonatoapatite, after different times of soaking in simulated body fluid. Gla...

in order to fabrication of transparent glass-ceramics with li-mica nano crystals, the glasses with chemical composition of 94.9 mass% li(1+x)mg3alsi3(1+x)f2 (x=0.5) with 5.1 mass% mgf2 were crystallized. the glasses were fabricated via the conventional melt-quenching technique. mica crystals were precipitated in the glass phase by later heat treatment. glass samples had glass transition tempera...

statement of problem: the connector area is the weakest zone of an all-ceramic fixed partial denture (fpd), where most catastrophic failures of the prostheses tend to occur. purpose: the aim of the present study was to assess the effect of the convergence angle of abutments on the fracture resistance of three-unit fixed partial dentures made of ips-empress2. materials and methods: forty extract...

Data are summarized on the synthesis of hydroxyapatite (HA) by wet-chemical processes, solidstate reactions, and hydrothermal treatment. The conditions for HA preparation via precipitation from solutions of calcium chloride, dibasic ammonium phosphate, and aqueous ammonia are discussed at length. Detailed analysis of the fabrication and properties of calcium-phosphate-based ceramics is presente...

 Oxyfluoride glass ceramics containing CaF2nano-crystals doped with Y3+ ions were prepared by one-step crystallization of SiO2- Al2O3- CaO- CaF2 glasses at different temperatures. X- ray diffraction (XRD) results have revealed that CaF2 was the only precipitated crystalline phase in glass ceramic samples. According to the XRD results, a glass ceramic was selected as the best sample in order to ...

hotostructurable glass–ceramics are suitable for 3-dimensional microfabrication and, in some instances, can be used as an alternative material o silicon in the microfabrication of micro-electro-mechanical-system (MEMS) devices. Foturan® is a photosensitive lithium–aluminium–silicate lass that can be structured by an exposure to UV light, followed by a thermal treatment and an etching step. In t...