نتایج جستجو برای: photocatalytic removal
تعداد نتایج: 156095 فیلتر نتایج به سال:
Introduction: Humic acid (HA) is one the original disinfection byproducts processors in water treatment. So, removing it is necessary before water chlorination. In the present study, photodegredation of humic acid in water using Ag/ZnO nano particle under UVc irradiation in batch system was investigated. Material and Methods: Photocatalytic study was carried out to evaluate the effect of UVc (...
Backgrounds & objectives: Heavy metals, such as chromium, are the most common pollutants usually found in high concentrations in industrial wastewater and cause damages to aquatic environments and endanger the health of living organisms, especially human. Therefore, the purpose of this research was to investigate the photocatalytic removal of hexavalent chromium from aqueous solution using UV/Z...
Background and Objective: Formaldehyde is a toxic volatile organic compound, which its removal from polluted air is essential. One of the techniques available for removing such compounds is photocatalytic degradation. The aim of this study was to investigate the photocatalytic degradation of gaseous formaldehyde on TiO2 nanoparticles coated on reduced graphene oxide Materials and Methods...
A photocatalyst was obtained by treating the commercial amorphous anatase titanium dioxide with ammonia water. During the preparation of photocatalytic material the optimal conditions of the separation operation were found. The photocatalyst was characterized by UV/VIS-DR, FTIR-DR, and XRD techniques, and high-resolution transmission electron microscopy (HR-TEM). According to the XRD method, th...
In this research, photocatalytic degradation method has been introduced to clean up Spent Caustic of Olefin units of petrochemical industries (neutralized Spent Caustic by means of sulfuric acid) in the next step, adaptable method and effective parameters in the process performance have been investigated. Chemical oxygen demand (COD) was measured by the commercial zinc oxide that synthesized wi...
The nano sized TiO2 and ZnO are the most active photocatalysts. Methylene blue was used as a reference molecule for the photocatalytic degradation. The TiO2 and ZnO can totally remove methylene blue dye. The effect of various process parameters like initial concentration, contact time, dose of catalyst and pH on the extent of removal of dye by photocatalysis in presence o...
Background and aims: Toluene is a toxic volatile organic compound that needs to be removed from contaminated air. Photocatalytic degradation is one of the techniqe available for removeing of compound. This study was performed to determine the efficiency of ZnO-SnO2/AC catalyst on the photocatalytic removal of toluene vapors. Methods: In this experimental study, the characteristics of the pro...
Background and Objectives: Photocatalytic oxidation (PCO) is a promising method for the removal of volatile organic compounds (VOCs). Photocatalytic oxidation process, despite its advantages, has disadvantages such as deactivation of photocatalyst. The deactivated photocatalyst can be active through thermal abatement, ozonation, exposure with clean air and UV radiation. Materials and M...
In the present work, it is very surprising to find that the precursors mass, a long overlooked factor for synthesis of 2D g-C3N4, exerts unexpected impact on g-C3N4 fabrication. The nanoarchitecture and photocatalytic capability of g-C3N4 can be well-tailored only by altering the precursors mass. As thiourea mass decreases, thin g-C3N4 nanosheets with higher surface area, elevated conduction ba...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید