The cathodic dissolution of platinum, resulting from the oxygen reduction reaction (ORR) or hydrogen peroxide reduction on platinum, has been investigated. Highly oxidizing hydroxyl radicals (OH•) are believed to be the species responsible for the platinum dissolution phenomenon. These radicals are produced from the ORR byproduct, hydrogen peroxide, through a 1 electron reduction pathway (H2O2 ...

Hard carbon spherule (HCS) has been investigated as a counter electrode for dye-sensitized solar cells. The overall conversion efficiency of the cell reached 5.7%, which is comparable to 6.5% of the counter electrode of platinum-sputtered fluorine-doped tin oxide used in Grätzel-type solar cells under the same experimental condition. It is found that the photovoltaic performance was strongly af...

In this paper the role of super paramagnetic iron oxide nanoparticles (SPI) on Platinum nanoclusters on activated carbon (Pt/C) for electrocatalytic oxygen reduction reaction was considered. Four composites of Pt/C and super paramagnetic iron oxide nanoparticles were prepared with the same total composites weight and different loading of Pt/C (1.2, 0.6, 0.4 and 0.3 mg ). The composite attached ...

The coulometric titration of 20-200 peq of acids and bases in DMSO media is described. In the titration of bases, the electro-oxidation of hydrogen at a platinized platinum electrode is used as the source of protons. The conditions for 100 % current efficiency at this electrode are low current density to avoid passivity and regular treatment of the electrode with potassium dichromate-sulfuric a...

Hybrid organic / inorganic films, composed of poly 4-aminoquinolidine (PAQ) matrix and Prussian blue – like copper hexacyanoferrate (CuHCFe) redox centers were prepared. Platinum disk (Pt) was used as a conductive substrate onto which the hybrid films (Pt/PAQ/CuHCFe) were electrodeposited by potential cycling. Electrochemical behavior of the modified electrode was well characterized using cycli...

We study the isothermal hydrogen adsorption and reaction at the E-TEK electrode of a polymer electrolyte fuel cell with a Nafion 117 membrane by impedance spectroscopy at 30 degrees C. We find that the impedance diagram must include a Gerischer phase element. Constant phase elements are not sufficient to describe the experimental data. This means that an adsorption reaction takes place in combi...

The cyclic voltammetry of both bulk manganese sulfate (BMS) and nano manganese sulfate (NMS) were studied using 0.1M KCl supporting electrolyte and glassy carbon working electrode. The redox behavior for both bulk (BMS) and MnSO4 (NMS) sulfate was studied voltammetrically in presence and absence of Doxorubicin (DR) using three electrodes system, silver- silver chloride (Ag/AgCl), pla...

We report on a novel voltammetric detection of oxalic acid by using glassy carbon electrodes with covalently attached nitrogen-containing functional groups prepared by stepwise electrolysis. A glassy carbon electrode electrooxidized in an ammonium carbamate solution was electroreduced at -1.0 V (vs. Ag/AgCl) in 1.0 M sulfuric acid for a long time. We found that the electrocatalytic oxidation wa...

A modified platinum electrode was fabricated by the electropolymerization of pyrrole using a sodium p-sulphonatocalix[6]arene as the supporting electrolyte. The modified electrode acts as a reasonably sensitive electrochemical sensor for dopamine giving a linear calibration curve in the range 0.075 – 1.00 mM dopamine. The sensor shows no ability to sense the common interferent ascorbic acid, th...

Using a graphite crucible as the counter-electrode, platinum microprobes with an aspect ratio of 30 and a tip apex radius less than 100 nm were fabricated by an electrochemical discharge etching process. The "neck-in" structure on the platinum wire induced by the electrical discharge at the liquid-air interface plays a key role in the probe shape and the voltage of the following pure electroche...