In the current research, polyvinylchloride based mixed matrix heterogeneous anion exchange membranes were prepared by a solution casting technique. Titanium dioxide nanoparticles were also utilized as inorganic filler additive in the membrane fabrication. The effect of TiO2 nanoparticles concentration in the casting solution on the membrane physico-chemical properties was studied. Membrane wate...

in this study, the influence of the salts as an additive on the performance of the membrane was investigated and an extensive work was performed to optimize pvdf hollow fiber membranes through a response surface methodology (rsm). the prepared membranes were characterized by sem, contact angle and lep measurement. then, the rsm was used for the optimization of surface pore size, porosity and hy...

Mixed matrix membranes (MMM) based on chitosan (CS) and poly (vinyl) alcohol (PVA) with a 50:50 w/w ratio doped with graphene oxide (GO) are prepared by solution casting and characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), water uptake, alcohol permeability, ion exchange capacity (IEC) and OH ́ conductivity measurements. The SEM anal...

Polyvinylchloride (PVC) based heterogeneous cation exchange membranes were prepared by the solution casting technique. The effect of super activated carbon nanoparticles concentration as filler additive in membrane matrix on ionic transfer behaviors of the membrane was studied. SOM images showed uniform particles distribution and relatively uniform surfaces for the membranes. The membrane water...

Carbon membrane can be produced using a wide variety of polymer precursor materials via heat treatment process. A general concept route of precursor selection-preparation-modification-performance analysis platform for the carbon membrane has been proposed to promote the development of carbon membrane material for a wide range of application. The current review considers the recent progress of c...

There is a need for polymeric hydrogen/air fuel-cell membranes that can efficiently conduct protons at moderate to high temperatures for wet and dry gas feeds. The US Department of Energy (DOE), for example, set an exceedingly stringent preliminary target for membrane conductivity, 0.10 Scm 1 at 120 8C and 50% relative humidity (RH). Herein, we describe the fabrication and basic properties of o...

The transport selectivity of different cations through cation exchange membranes (CEMs) could be estimated with the partitioning factor (Kji) and mobility ratio in membrane (uim/ujm), which turn can related to corresponding conductivity dimensional swelling data [Journal Membrane Science, 2020, 597, 117645]. This method has been validated two hydrocarbon polymer-based CEMs, obtained K+/Na+ equa...