A copper(II) ion-selective PVC membrane sensor based on 2-(1'-(4'-(1''-hydroxy-2''-naphthyl)methyleneamino)butyl iminomethyl)-1-naphthol (BHNB) as a novel Schiff base containing a sensing material has been successfully developed. The sensor exhibits a good linear response of 29 mV per decade within the concentration range of 10(-1)-10(-6) M of Cu2+. The sensor shows good selectivity for copper(...

in this work, all-solid-state potentiometric pvc membrane sensor was introduced for fast andsimple monitoring of mercury ions in waste water samples. the all solid sate electrode is made based on aconductive composite of graphite, reduced graphene oxide, epoxy resin on a copper wire. a thin layer pvcmembrane is then coated on the surface of the new conducting transducer. pvc membrane is compose...

in this work, the results concerning to the mean activity coefficient measurements for nacl in the (glycerol + water) system using the potentiometric method are reported. the potentiometric measurements were performed on the galvanic cells without liquid junction of the type: ag|agcl|nacl (m), glycerol (wt%), h2o (1 - wt)%|na-ise, in various mixed solvent systems containing 0, 5, 10, 20 and 30 ...

A thiocyanate poly(vinyl chloride) (PVC) membrane electrode based on [1,2-bis(diphenylphosphino)ethane]dihalopalladium(II), [(dppe)PdX2, X = Cl (L), X = I (L)] as active sensor has been developed. The diiodopalladium complex, [(dppe)PdI2](L) displays an anti-Hofmeister selectivity sequence: SCN‒ > I‒ > ClO4‒ > Sal‒ > Br‒ > NO2‒ > HPO4‒ > AcO‒ > NO3‒ > H2PO4‒ > CO32‒. The electrode exhibits a Ne...

A novel PVC membrane sensor for the Sr ion based on 1,10-diaza-5,6-benzo-4,7dioxacyclohexadecane-2,9-dione has been prepared. The sensor possesses a Nernstian slope of 30.0 ± 0.6 mV decade over a wide linear concentration range of 1.6 × 10-3.0 ×10 M with a detection limit of 6.3 ×10 M. It has a fast response time of <15 s and can be used for at least two months without any considerable divergen...

A novel potentiometric sensor based on ionophore (Cd(NH2CH2CH2OCH2CH2OCH2CH2NH2)Ag3(CN)5) for the determination of β-N-oxalyl-L-α, β-diaminopropionic acid (ODAP) is developed. The ODAP-selective membrane sensor demonstrates high sensitivity and short response time. The detection limit of the ODAP-selective membrane sensor is about 2 × 10(-6) mol L (-1) and the response time is shorter than 6 s....

Quantification of oversulfated chondroitin sulfate (OSCS) in biomedical heparin preparations is achieved using a recently described potentiometric polyanion sensor-based approach operated in a kinetic mode of analysis. This is accomplished by adjusting the concentration of the test sample to a range where the OSCS level is low enough for the sensor not to achieve a full and rapid equilibrium ph...

Potentiometric pH selective tips for scanning electrochemical microscopy (SECM) have been developed and used to image local pH changes in a variety of model chemical systems. Images of pH profiles around a platinum microelectrode during water reduction, a corroding disk of silver iodide in aqueous potassium cyanide, a disk of immobilized urease hydrolyzing urea, and a disk of immobilized yeast ...

Two quasi-independent methods for potentiometric and optical determination of chloride were simultaneously implemented in a flow system, providing real-time assessment of the quality of results. A potentiometric and an optical polymeric membrane doped with the same indium(III) octaethyl-porphyrin were used as sensor ionophore. The working mechanism and the analytical characteristics of these po...

A novel triiodide ion-selective electrode based on a clotrimazole-triiodide ion pair as a membrane carrier was prepared. It has a linear response to triiodide from 8 x 10(-6) to 5 x 10(-3) M with a slope of -68.9 mV per decade and a detection limit of 5 x 10(-6) M. The electrode response is independent of the pH of the solution in the pH range 2-9. It has a very short response time and can be u...