In this work, we analyze the efficiency of the modification of the implant surface. This modification was reached by the formation of a two-level relief hierarchy by means of a sol-gel approach that included dip coating with subsequent shock drying. Using this method, we fabricated a nanoporous layer with micron-sized defects on the nanotitanium surface. The present work continues an earlier st...

Abstract Various experimental analyses on hydrogen evolution, absorption, and cracking behaviors were conducted to gain a fundamental understanding of the embrittlement ultrastrong steel sheets with galvanized (GI) galvannealed (GA) coatings. The evolution absorption are controlled primarily by potential differences between coating exposed substrate, corrosion-induced damage pattern coating. hi...

Abstract This research aims to investigate the effect of chemical treatment on integrity epoxy coating applied mild steel substrates. Grit blasted samples were chemically treated in 10 vol.% NaOCl solution, CrCl 3 and 30 H PO 4 –5 HNO solutions prior application. Post-cleaning surface morphology composition revealed formation oxidation products surface. Under optimized conditions, a dry film th...

Despite their good biocompatibility and adequate mechanical behavior, the main limitation of Mg alloys might be their high degradation rates in a physiological environment. In this study, a novel Mg-based alloy exhibiting an elastic modulus E = 42 GPa, Mg-1Ca-0.2Mn-0.6Zr, was synthesized and thermo-mechanically processed. In order to improve its performance as a temporary bone implant, a coatin...

In this study porous alumina samples were prepared and then coated using the biomimetic coating technique using a five times Simulated Body Fluid (5.0SBF) as the growth solution. A coating was achieved after pre-treatment with concentrated acid. From elemental analysis, the coating contained calcium and phosphorous, but also sodium and chlorine. Halite was identified by XRD, a sodium chloride p...

The aim of this study was to deyelop a noyel hydroxyapatite (HA) coating method on zirconia using glass coating technique. A borosi)icate glass, the mixture of the glass ttnd HA (3e, 50, 70, and 90 mass%), and the 100% HA were coated on two kinds of zirconia discs and fired at 900-950'C. After the final coating, the surface of the sample was etched for 3 min in an acid-mixture of 3% HF and 5%HN...

High-temperature titanium alloys are widely used in aerospace hot parts; however, the thermal barrier temperature of 600 °C limits its service temperature. In this paper, a two-step hot-dip plating method is proposed to prepare composite coating containing Ce on surface alloy, which can make oxidation resistance alloy reach 800 The microstructure, phase composition, and element distribution Ce-...

in this research controlled coating of magnetite (fe3o4) nanoparticles with sio2 was investigated. the fe3o4 nanoparticles were synthesized via chemical co-precipitation and then coated by silica according to stober method. effects of tetra ethyl ortho silicate (teos) concentration and ethanol to teos on the coating thickness were investigated. x-ray powder diffraction, fourier transform infrar...