Figure 3 shows a HREM image of a silica ge112 specimen. The corresponding optical transform (inset Figure 3) indicates that the Scherzer defocus condition is well-satisfied, with spacings in the range 2.4-6.3 A appearing in the image. In this case there is no evidence for departures from randomness, either in the image or its optical transform, and it might be argued that this is consistent wit...

to explore the possibility of using graphene based biosensor, adsorption of hydrogen peroxide on graphene has been investigated using density functional theory. the electronic properties of defect free and defective graphene in the presence of different number of hydrogen peroxide have been studied. the graphene with the most stable configuration defect named as sw defect is considered. the hig...

We present a numerical and experimental study of a guided-mode-resonance (GMR) device for detecting surface-bound light-absorbing thin films. The GMR device functions as an optical resonator at the wavelength strongly absorbed by the thin film. The GMR mode produces an evanescent field that results in enhanced optical absorption by the thin film. For a 100-nm-thick lossy thin film, the GMR devi...

Electroceramic thick films are 2D (planar) structures that, in their simplest form, consist of a substrate, a bottom electrode, a ceramic film and a top electrode, with the thickness of an individual layer being typically between 1 and 100 μm. The processing of thick films is similar to the processing of bulk ceramics, i.e., it involves powder synthesis, shaping and sintering. The major differe...

A sensor node is generally small in physical size (typically a few cm or smaller) and consist of a sensor, a transceiver, and supporting electronics. They are connected as a wireless network and are sometimes isolated and embedded in structures, which are not easily accessible. The lifespan of the sensor node is critically dependent upon the power source it contains. Instead of using a limited ...

Thin Al2O3 films are grown and in situ doped with erbium by pulsed laser deposition in a single step process, by alternate ablation from Al2O3 and Er targets. The as-deposited films have an Er step dopant profile throughout the film thickness, whose concentration depends on the number of pulses at the Er target. The as-grown films are optically active, as evidenced by the photoluminescence spec...

Two problems of technological importance for microelectromechanical systems ~MEMS! and microelectronics industry are addressed: fatigue of thin films and nanoscale film cracking. A device is described that can ~1! conduct biaxial fatigue tests on thin films and ~2! be utilized to study fracture patterns in nanoscale coatings under biaxial stress state. Thin-film specimens, in the form of circul...

High-accuracy transmission measurements at an optical wavelength of 633 nm and mechanical measurements of the thickness of a 13-µm thick silicon-crystal film have been used to calculate the absorption and extinction coefficients of silicon at 633 nm. The results are 3105±62 cm-1 and 0.01564±0.00031, respectively. These results are about 15% less than current handbook data for the same quantitie...

Light trapping and photon management of silicon thin film solar cells can be improved by a separate optimization of the front and back contact textures. A separate optimization of the front and back contact textures is investigated by optical simulations taking realistic device geometries into consideration. The optical simulations are confirmed by experimentally realized 1 μm thick microcrysta...

Cu(In,Ga)Se2 thin films (CIGS) on metallic substrate (titanium, molybdenum, aluminum, stainless steel) were prepared by a two-step selenization of Co-evaporated metallic precursors in Se-containing environment under N2 gas flow. Structural properties of prepared thin film were studied. To characterize the optical quality and intrinsic defect nature low-temperature photoluminescence, were perfor...