We report a passively Q-switched Ho:YVO4 laser pumped at 1.94 μm with multilayer graphene as a saturable absorber. At the absorbed pump power of 9.3 W, the maximum average output power of 2.2 W was obtained in Ho:YVO4 laser with minimum pulse width of 265.2 ns and pulse repetition rate of 131.6 kHz at 2052.1 nm. In addition, a beam quality factor of M2~1.7 was measured at the maximum output lev...

We report the operation of a diode-pumped monolithic self-Q-switched Cr,Yb:YAG laser which generates 20 lJ pulses at 1030 nm with a pulse duration of 500 ps in a single longitudinal mode. 2003 Published by Elsevier Science B.V. PACS: 42.55.xi; 42.60.Gd

We present the room temperature Q-switched performances of a Ho:LuAG laser operated at 2.1 microm. At the repetition rate of 10 kHz, the maximum average output power of 9.9 W with a slope efficiency of 69.9% relative to absorbed pump power was obtained in Ho:LuAG laser. Also, the minimum pulse width of 33.0 ns was obtained, corresponding to the peak power was 30.0 kW.

682 infrared range of the electromagnetic spectrum. Though all these lasers would have some effect on melanin, three wavelength bands are most useful for treating pigmented lesions – green, red, and infrared.[1] Its not only about the wavelength, it is more about the right pulse duration and at sufficient fluence. Since green and blue light lasers are long pulsed continuous waves, they cause a ...

This work describes a cryogenic, electro-optically -switched Yb:YAG laser that generates 114-W average TEM power with 47% optical-to-optical efficiency. Pulse repetition frequency is 5 kHz, pulse duration is 16 ns full-width at half-maximum, and is less than 1.05.

BACKGROUND AND OBJECTIVE Q-switched laser treatments are considered the standard method for removing both regular and traumatic tattoos. Recently, the removal of tattoo ink using ablative fractional lasers has been reported. Ablative fractional CO2 laser and q-switched ruby laser treatments were used in a split-face mode to compare the safety and efficacy of the two types of laser in removing a...

Extensive studies have been performed on random lasers in which multiple-scattering feedback is used to generate coherent emission. Q-switching and mode-locking are well-known routes for achieving high peak power output in conventional lasers. However, in random lasers, the ubiquitous random cavities that are formed by multiple scattering inhibit energy storage, making Q-switching impossible. I...

We report the operation of a diode-pumped monolithic self-Q-switched Cr,Nd:YAG laser in which the codoped ions create saturable absorption for Nd(3+) laser emission at 1064 nm. With a 70-microm beam diameter in the gain medium, the Q-switched pulse has a duration of 3.5 ns and a peak power of 2 kW. The output is linearly polarized with an extinction ratio of 600:1. The pulse-to-pulse intensity ...

High power, highly efficient single frequency oscillation of Er:YAG fiber-bulk hybrid laser at 1645 nm is demonstrated in actively and passively Q-switched operation modes. The slope efficiencies in the active and passive Q-switched operation reached 75% and 20%, respectively, with the record output powers in the narrow-linewidth and single longitudinal mode regimes of operation.

A 10-mm cavity length magnetooptically Q-switched Nd:GdVO4 laser was demonstrated using a single-crystalline ferrimagnetic rare-earth iron garnet film. To design the Q-switching system, the magnetic, optical, and magnetooptical properties of the garnet film were measured. The diode pumped solid-state laser cavity was constructed using a 190-μm-thick garnet film with 58% transmittance. The garne...