This study aimed to evaluate the methyl red (MR) removal efficiency from aqueous matrices using an eco-friendly anionic surfactant (a calcium surfactant, or CaSF), obtained frying oil residue. Data by infrared spectroscopy revealed several functional groups that favor capture of dye chemisorption forming hydrogen bonds and covalent interactions. The kinetic testing results fit pseudo-second ord...

This study aimed to evaluate the adsorption capacity of an adsorbent obtained using sanky peel for removal phosphate from aqueous solutions. The was conducted in two stages: (1) preparation considering yield, removal, capacity, and textural characteristics; (2) assessment effectiveness as removing phosphates Batch studied solutions containing calcium ions with selected adsorbent. Adsorption kin...

Production of biochar is accomplished by pyrolysis corncobs at 350 °C (BC-350) and 450 (BC-450) under oxygen-limited conditions. The chemical physical properties were investigated via XRD, FTIR, BET, SEM EDX analysis. Batch experiments conducted for the adsorption Pb2+ ions from aqueous solution onto with regards to pH, contact time, dose initial concentration. efficiency was increased as incre...

Adsorption is considered to be one of the most effective technologies widely used in global environmental protection areas. Modeling of experimental adsorption isotherm data is an essential way for predicting the mechanisms of adsorption, which will lead to an improvement in the area of adsorption science. In this paper, we employed three isotherm models, namely: Langmuir, Freundlich, and Dubin...

In this paper, a new and facile approach for molybdate loading in the brown algae of Sargassum angustifolium is introduced. The molybdate ions were entered into the algae body during a short cultivation to produce algae-Mo as a novel adsorbent for eliminating phosphate ions from synthetic and real wastewaters. Results of the surface analysis showed that molybdate loading onto the algae was succ...

The present study deals with the utilization of a cellulosic material, i.e. fungal biomass of Mucor heimalis, for the removal of cadmium from aqueous solution in a batch system. Effects of various parameters such as pH, biomass dosage, contact time, and initial metal concentrations were investigated. The sorption of cadmium followed pseudo-secondorder rate kinetics (R=0.998). Intraparticle diff...

The crosslinked chitosans synthesized by the homogeneous reaction of chitosan in aqueous acetic acid solution with epichlorohydrin were used to investigate the adsorptions of three metals of Cu(II), Zn(II), and Pb(II) ions in an aqueous solution. The crosslinked chitosan characterized by 13CNMR, SEM, and elemental analysis, and the effects of pH and anion on the adsorption capacity were carried...

In this paper, chemically synthesized copper oxide nanoparticles (CuO-NPs), were employed for two processes: one is photocatalytic degradation and second one adsorption for the sorption of safranine (SA) dye in an aqueous medium at pH = 12.01. The optimized analytes amount (nano-adsorbent = 0.10 g, conc. range of SA dye 56.13 ppm to 154.37 ppm, pH = 12.01, temperature 303 K) reached to equilibr...

The sorption of cadmium (Cd) and lead (Pb) by calcium alginate beads (CAB) from aqueous solutions in batch systems was investigated. The kinetic and thermodynamic parameters, as well as the sorption capacities of CAB in each system at different temperatures, were evaluated. The rate of sorption for both metals was rapid in the first 10 minutes and reached a maximum in 50 minutes. Sorption kinet...

Batch adsorption experiments were carried out for the adsorption of cationic dye from aqueous solution onto composite activated carbon. The composite activated carbon was prepared from brewer’s spent grain and sea bean shell at a ratio of 1:1. The equilibrium studies were done at different concentrations and temperatures. The equilibrium data were fitted to Langmuir, Freundlich, Dubinin-Radushk...