The problems encountered with the interpretation of martensite and the various forms of bainite that are found in high strength steel weld metals have been addressed. Field emission gun scanning electron microscopy was found to overcome resolution difficulties often met with light optical microscopy and conventional scanning electron microscopy. The various microstructural constituents were cha...

A new experimental approach is used to quantify the full field heterogeneous strain accommodation associated with martensitic phase transformation in Nickel–Titanium at the microstructural length scale. Local deformation measures were matched with underlying microstructural characteristics obtained by EBSD, providing point-by-point correlation between transformation extent and microstructure. I...

Strong steels also have to be tough and hence rely on fine microstructures such as bainite or martensite, produced commercially by continuous cooling transformation. Depending on the detailed requirements, the steel-design process may explicitly require other higher temperature phases to be absent in the final microstructure. Such a procedure can be made easier by the availability of a good met...

The present work explores the magneto-inductive method to evaluate different levels of retained austenite content in carburized 20NiCrMo7 bearing steel while comparing corresponding measurements by X-ray diffractometry and image analysis optical microscope. was modified with additional tempering yield three samples distinct ranges profiles region steel. measured at depths these using had an out...