An efficient C0 continuous two dimensional (2D) finite element (FE) model is developed based on a refined higher order shear deformation theory (RHSDT) for the static analysis of soft core sandwich plate having imperfections at the layer interfaces. In this (RHSDT) theory, the in-plane displacement field for the face sheets and the core is obtained by superposing a globally varying cubic displa...

large size direct shear tests (i.e.300 x 300mm) were conducted to investigate the interaction between clay reinforced with geogrids embedded in thin layers of sand. test results for the clay, sand, clay-sand, clay-geogrid, sandgeogrid and clay-sand-geogrid are discussed. thin layers of sand including 4, 6, 8, 10, 12 and 14mm were used to increase the interaction between the clay and the geogrid...

There are different finite element models in place for predicting the bending behavior of shear deformable beams and plates. Mostly, the literature abounds with traditional equi-spaced Langrange based low order finite element approximations using displacement formulations. However, the finite element models of Timoshenko beams and Mindlin plates with linear interpolation of all generalized disp...

In this article, a new higher order shear deformation theory based on trigonometric shear deformation theory is developed. In order to consider the size effects, the nonlocal elasticity theory is used. An analytical method is adopted to solve the governing equations for static analysis of simply supported nanoplates. In the present theory, the transverse shear stresses satisfy the traction free...

Shear band spacing in Zr-based bulk metallic glasses (BMGs) under dynamic loads is found to vary with position and local strain rate in the indented region. To investigate the dependence of shear band evolution characteristics on local strain rate and normal stress, a micromechanical model based on momentum diffusion is proposed. The thermomechanical model takes into account the normal stress d...

dehbid mylonite nappes associated with the tutak gneiss dome as the zagros hinterland involved-basement window in the zagros orogenic belt has significant components of dextral sense of shear along the mylonite nappes and are related to the high proportion of simple shear relative to pure shear deformation. kinematic vorticity analysis (wk) was made in order to determination of relative amounts...

We use shear transformation zone (STZ) theory to develop a deformation map for amorphous solids as a function of the imposed shear rate and initial material preparation. The STZ formulation incorporates recent simulation results [T. K. Haxton and A. J. Liu, Phys. Rev. Lett. 99, 195701 (2007)] showing that the steady state effective temperature is rate dependent. The resulting model predicts a w...

This paper presents a practical methodology for optimization of concentrically braced steel frames subjected to forward directivity near-fault ground motions, based on the concept of uniform deformation theory. This is performed by gradually shifting inefficient material from strong parts of the structure to the weak areas until a state of uniform deformation is achieved. In this regard, to ove...