This Standard Reference Material (SRM) consists of a sintered alumina disc intended for use in calibration of X-ray powder diffraction equipment with respect to line position and intensity as a function of 2 angle. The solid form of the SRM eliminates any variability in intensity measurements introduced by the sample loading procedure. A unit of SRM 1976b consists of a sintered alumina disc ap...

An effective heat dissipation of uncooled 400-Gbps (16×25-Gbps) form-factor pluggable (CDFP) optical transceiver module employing chip-on-board multimode 25-Gbps vertical-surface-emitting-laser (VCSEL) and 25-Gbps photodiode (PD) arrays mounted on a brass metal core embedded within a printed circuit board (PCB) is proposed and demonstrated. This new scheme of the hollow PCB filling with thermal...

Fine-grained tungsten carbide copper (WC-Cu) cemented carbide was sintered via spark plasma sintering at 1773K using a fine WC powder with a mean particle size of 0.11 mm. The mechanical properties were compared with tungsten carbide cobalt (WC-Co) cemented carbide and a binderless WC-sintered material. The Vickers hardness and fracture toughness obtained by the indentation fracture method for ...

The dezincification of brasses has been the subject of substantial conjecture and investigation over the past century and the technical press is littered with papers on the problem. Very broadly the technical literature can be subdivided into five main groups as follows: (a) Observations of dezincification phenomena including mechanically induced dezincification and in-service experience in var...

The aim of the present investigation is to study the sintering behavior of the Cu12Sn bronze system in both, a microwave furnace as well as a conventional furnace. The powders prepared by premixed and prealloyed routes were sintered in the range of solid state, transient and supersolidus liquid phase sintering conditions. The comparative analysis is based on the sintered density, densification ...

A new sintering mechanism is revealed for copper powder being sintered under the influence from electrical field and force-field during forming of micro-components. The analysis of the microstructure and grain boundary evolution on the sintered samples showed that interface disappearance at contact areas between particles is a continuous process which involves new grain formation and grain refi...

Doped ceria has been considered for high oxygen ion conductivity for solid oxide fuel cells. In the present study, 20 mole% samarium doped nano ceria powder was prepared by wet chemical synthesis and sintered at different temperatures to retain submicron grains (> 92-96% density). ionic conductivity of the sintered pellets was measured using impedance spectroscopy as a function of temperature (...