This paper shows the design and control methods of the bidirectional DC-DC converter to generate the proper DC-link voltage of a PMSM drive. Conventionally, because the controllable power of the PWM based voltage source inverter is limited by its DC-link voltage, the DC-DC converter is used for boosted DC-link voltage if the inverter source cannot generate enough operating voltage for the PMSM ...

Most mobile equipments use battery as power source. The increasing use of low voltage portable devices and growing requirements of functionalities embedded into such devices. Thus an efficient power management technique is needed for longer battery life for them. Given the highly variable nature of batteries systems often require supply voltages to be both higher and lower than the battery. Thi...

Was concentrated on tree phase matrix converter topology. Single-phase Matrix converter or SPMC was first implemented by Zuckerbeger4. Now presented a.Abstract. This paper presents the single phase matrix converter topology that will operate as an uninterruptible power supply circuit. A single circuit is developed.Single phase matrix converter SPMC performs a function such as frequency changer,...

This paper presents a new single to three phase converter using rotating magnetic field transformer. Conventional transformers have been used in many converters aiming at supplementary improvements and they usually have no critical effect on the conversion technique. In this paper, the conversion technique is based on a special rotating magnetic field transformer in which there are two windings...

Multicell converter are a very interesting alternative for medium and high power drives. This paper presents a new configuration of double flying capacitor (DFCM) converter. The main advantages of the proposed converter in comparison with FCM and stacked multicell converter are doubling the rms and the number of output voltage levels, improving the output voltage frequency spectrum, and cancell...

A unified power flow controller (UPFC) based on the flying capacitor (FC) multilevel voltage-source converter (VSC) topology with phase-shifted sinusoidal pulse-width modulation (PWM) control is presented. This converter allows higher power handling, potentially lower power loss, lower harmonic distortion and hence less filtering requirements when compared with the typical two-level counterppar...

A novel isolated ac/dc converter topology incorporates a voltage source converter (VSC) with capacitive snubbers and a cycloconverter, connected by a medium frequency transformer. The concept offers the possibility of bilateral power flow as well as three-level pulse width modulation on the ac side. It is shown that by alternately commutating the VSC and the cycloconverter it is possible to ach...

Traditional DC-DC Boost converters are used in high voltage applications, but they are not economical due to limited output voltage, large voltage ripples, current ripples and power losses. A closed loop control scheme for a simple DC-DC Boost converter in designed and the performance characteristics are studied using MATLAB simulink. The performance of the controller is also studied for variou...

The Matrix converter is a forced commutated Cyclo-converter with an array of controlled semi conductor switches that connects directly the three phase source to the three phase load. The matrix converter is a direct AC-AC Converter. It has no limit on output frequency due to the fact that it uses semiconductor switches with controlled turn-off capability. The simultaneous commutation of control...