1. Steam Generation 1.1. General Characteristics 1.2. Circulation in Boiling Water Reactors 1.3. Steam Generation in CANDU Reactors 1.4. Steam Generators 1.5. Steam Generator for PWR and CANDU Systems 1.6. Heat Transfer 2. Steam Generator Operation 2.1. Swelling and Shrinking 2.1.1. Steady State Swelling and Shrinking 2.1.2. Transient Swelling and Shrinking 2.2. Level Control 2.3. Carryover 2.4...

Laboratory measurements of the effects of steam injection on the electrical conductivity of sands can aid in the interpretation of electrical surveys used to monitor subsurface steam-injection projects. The effect of variations in injected steam quality was measured in the experiments presented here. The injection of low-quality steam, boiled from a 0.01 mol/L NaCl solution, into clean sand sat...

The effect of clay content on the electrical response of steamflooded geologic material is studied using a combination of laboratory experiments and numerical simulations. The presence of clay can increase the conductivity of a steam zone by providing a surface conduction path that is enhanced strongly by temperature increases. Clay also increases the residual water saturation in a steam zone, ...

Steam-induced vibration is a kind of self-excited vibration which is one of the most important issues affecting the operation reliability of steam turbines. A lot of actual cases of steam-induced vibration of steam turbine were collected in this work. And steam-induced vibration fault was statistical and classified by fault reason, happened time, occurrence load and fault severity. The statisti...

The boiler drum level control unit is one of the main parameter in the thermal power station. Currently the boiler drum parameters are monitored only by using MATLAB software. There is no automatic control available. In the proposed system the boiler drum parameters such as temperature level, pressure level, water level and Droplet identifier are measured and controlled by using embedded proces...

A soil core, obtained from a contaminated field site, contaminated with a mixture of volatile and semivolatile organic compounds (VOC and SVOC) was subjected to air and steam flushing. Removal rates of volatile and semivolatile organic compounds were monitored during flushing. Air flushing removed a significant portion of the VOC present in the soil, but a significant decline in removal rate oc...

PURPOSE To compare PRESS and STEAM MR spectroscopy for assessment of liver fat in human subjects. MATERIALS AND METHODS Single-voxel (20 x 20 x 20 mm) PRESS and STEAM spectra were obtained at 1.5T in 49 human subjects with known or suspected fatty liver disease. PRESS and STEAM sequences were obtained with fixed TR (1500 msec) and different TE (five PRESS spectra between TE 30-70 msec, five S...

[1] Steam explosions, or littoral blasts, generated when pyroclastic flows interact with seawater may be a common, although rarely documented, phenomena. The development of steam explosions rather than passive steam production is related to the rate of thermal energy transfer from hot pyroclasts to water. We conduct a series of laboratory experiments to quantify the heat transfer and steam prod...

Steam-water flow exists in most geothermal reservoirs where steam-water capillary pressure plays an important role in controlling fluid distribution, transfer of liquid between fracture and matrix, well productivity, and even the reserves. However, it is very difficult to measure steam-water capillary pressure due to the phase transformation and the significant mass transfer between the two pha...