The usage of advanced high strength steels (AHSS) in structural automotive components has been broadened in the past few years to satisfy the strict specifications of the automotive industry. Besides showing excellent strength to weight rations, AHSS have several limitations due to the high loads required in cold forming and cutting tools, which decrease considerably the tooling performances. T...

The microstructure and mechanical properties of Fe-0.85Mo-Ni powder metallurgy (P/M) steels were investigated as a function of sintered density. A quantitative analysis of microstructure was correlated with tensile and fatigue behavior to understand the influence of pore size, shape, and distribution on mechanical behavior. Tensile strength, Young’s modulus, strain-to-failure, and fatigue stren...

There have been concerted world wide efforts to develop steels suitable for use in efficient fossil fired power plants. Ferritic alloys containing between 9 and 12 wt-% chromium are seen as the most promising materials in this respect, especially for thick walled components such as headers and the main steam pipe in boilers. However, the performance of the improved steels has often not been rea...

Many traditional approaches for strengthening steels typically come at the expense of useful ductility, a dilemma known as strength-ductility trade-off. New metallurgical processing might offer the possibility of overcoming this. Here we report that austenitic 316L stainless steels additively manufactured via a laser powder-bed-fusion technique exhibit a combination of yield strength and tensil...

Alloy design is a challenging multi-objective optimisation problem, which consists of finding the optimal processing parameters and the corresponding chemical compositions to achieve certain pre-defined mechanical properties of steels. In this paper, we combine fuzzy modelling and Particle Swarm Optimisation (PSO) to address the multi-objective optimal alloy design problem. An adaptive weighted...

It is well known that inclusions and clusters, which are formed in liquid steel during ladle treatment, have harmful effects on the casting process (clogging problems) as well as on the final mechanical properties of a steel product. Especially, steels deoxidized or alloyed with rare earth metals (REM) are difficult to produce due to the high tendency of REM-oxides to form cluster and clog the ...

Developments in computer-aided engineering and the rapid growth of computational power have made simulation-driven process and product development efficient and useful since it enables detailed evaluation of product designs and their manufacturing processes. In the context of a sheet metal component, it is vital to predict possible failure both during its forming process and its subsequent usag...

One of the attractive low activation steels is the austenitic Mn-Cr steel from the view point of waste disposal because of few long-lived nuclides. In this paper, three types of Mn-Cr austenitic steels were fabricated by vacuum induction furnace. Then plates with 10 mm thickness were fabricated by hot-rolling. The physical metallurgy of these steels was studied by the corrected Schaeffler diagr...

Experimental results and explanations for the transition temperature from upper to lower bainites in carbon steels containing from 0.20 to 1.80 wt%C were presented metallographically and kinematically. The experimental results are summarized as follows: I) Lower bainite is not formed in steels with less than 0.35 wt%C and no transition from upper to lower bainite occurs. 2) The transition tempe...

Austenitization is an inevitable occurrence during the heat treatment of steels. Despite this consideration, less attention has been paid so far to the study of the formation of austenite as compared with the vast amount of research on its decomposition. That is because the steel properties depend basically on the transformation processes following austenitization. However, the initial austenit...