In this research, two radiofrequency identification (RFID) antenna sensor designs are tested for compressive strain measurement. The first design is a passive (battery-free) folded patch antenna sensor with a planar dimension of 61mm × 69mm. The second design is a slotted patch antenna sensor, whose dimension is reduced to 48mm × 44mm by introducing slots on antenna conducting layer to detour s...

Local deformation due to the interaction of small scale features such as voids or hard particles is expected to have a significant influence the failure mode of a material. To this end, the fracture pattern of a perforated aluminum sheet is studied experimentally and numerically using finite element models on two different length scales: a full-scale structural model and a local cell model base...

Transformation-induced plasticity (TRIP) is a phenomenon that improves the deformability of high-strength steel. TRIP depends on deformation-induced martensite transformation behavior. To clarify mechanism in low-alloy steel, we evaluated behavior via in-plane tension and compression experiments. During tensile compressive deformation, volume fraction austenite (Vγ) decreased as strain stress i...

Strain path transition is a common phenomenon during continuous stamping operations of sheet metal and can potentially alter the forming limit material. Enabling strain change in single experiment key challenge faced by several researchers. To understand effect on material limits, detailed characterisation needed where deformed while changed continuously. In this work, test method was developed...

A method is presented for calculating longitudinal glacier strain rates directly from the wrapped phase of an interferometric synthetic aperture radar (InSAR) interferogram assuming the ice flow path is known. This technique enables strain rates to be calculated for scenes lacking any velocity control points or areas within a scene where the phase is not continuously unwrappable from a velocity...

background: heat stress is a common and usual problem in industries. several indices, including wet bulb globe temperature (wbgt), are used to evaluate heat stress. however, wbgt index has limitations such as high cost and response time. it is not thus suitable as a screening tool. heat strain scoring index (hssi) is also an observational-judgmental technique that has been developed for primary...

Single compression tests were conducted for two types of pure Al (99.99%): one processed using equal-channel angular pressing (ECAP) through route Bc for 8 passes and the other with the same ECAP but successively annealed at 573K for 1 h. The distributions of the equivalent strain introduced by the compression were quantitatively examined by finite element analysis (FEA). Comparison was made be...