The present Experimental investigation is to study the Mechanical Properties of the Fly ash concrete reinforced with steel fibers. The concrete composite comprises of steel fibers in different percentages and partial replacement of cement in different proportions. Steel fibers varied from 0%, 0.5%, 1% and 1.5% by weight of cement and replacement of fly ash varied from 0%, 10%, 20%, 30% and 40% ...

The 45-T Hybrid magnet will employ Cable-In-Conduit Conductor (CICC) technology for the windings of the Nb3Sn and NbTi coils. The conduit steel must retain high strength and fracture toughness at 4 K, following the Nb3Sn reaction heat treatment. The design requirements call for a 4 K yield strength exceeding 1000 MPa and a 4 K fracture toughness (KIc) greater than 110 MPa m -0.5. We report the ...

In this study, the concrete-steel bond strength of concrete filled cylindrical steel tubes has been experimentally investigated. 22 short, high strength and normal concrete filled circular steel tubes were tested. Push-out test was carried out as the common method to evaluate the bond carrying capacity. Four different concrete mixes were used in preparing the specimens. The steel tubes were w...

Fibres are generally used as resistance of cracking and strengthening of concrete. In this project, I am going to carry out test on steel fibre reinforced concrete to check the influence of fibres on flexural strength of concrete. According to various research papers, it has been found that steel fibres give the maximum strength in comparison to glass and polypropylene fibres. Hence, in this pr...

One effect of nonlinear elasticity on elastic wave propagation is that the velocity of the elastic wave is a function of the applied stress on the material. This effect has been used to characterize the nonlinear elastic properties of numerous materials and is also important in attempts to nondestructively characterize residual and applied stress in materials. In addition, investigations have e...

Jamesh, M., Boxman, R., Bilek, M., Kocer, C., Hu, T., Zhang, X., McKenzie, D., Chu, P. (2016). Effects of pulse voltage and deposition time on the adhesion strength of graded metal/carbon films deposited on bendable stainless steel foils by hybrid cathodic arc Glow discharge plasma assisted chemical vapor deposition. Applied Surface Science, 366, 535-544. <a href="http://dx.doi.org/10.1016/j.ap...

Jamesh, M., Boxman, R., Bilek, M., Kocer, C., Hu, T., Zhang, X., McKenzie, D., Chu, P. (2016). Effects of pulse voltage and deposition time on the adhesion strength of graded metal/carbon films deposited on bendable stainless steel foils by hybrid cathodic arc glow discharge plasma assisted chemical vapor deposition. Applied Surface Science, 366, 535-544. <a href="http://dx.doi.org/10.1016/j.ap...