The objective of this study was to quantify the influence of zinc oxide nanoparticles (nanoZnO) on the water repellency and dimensional stability of beech wood. Beech wood blocks were treated with a nano-ZnO solution at four treatment levels (0, 10,000, 20,000, and 40,000 ppm) using a modified dip method. Also, a thermal treatment was performed at 60 and 120°C. After conditioning the samples, w...

Dimethylsulfoniopropionate (DMSP) is a versatile sulfur source for the production of sulfur-containing secondary metabolites by marine bacteria from the Roseobacter clade. (34)S-labelled DMSP and cysteine, and several DMSP derivatives with modified S-alkyl groups were synthesised and used in feeding experiments that gave insights into the biosynthesis of sulfur volatiles from these bacteria.

Band gap narrowing is important and advantageous for potential visible light photocatalytic applications involving metal oxide nanostructures. This paper reports a simple biogenic approach for the promotion of oxygen vacancies in pure zinc oxide (p-ZnO) nanostructures using an electrochemically active biofilm (EAB), which is different from traditional techniques for narrowing the band gap of na...

In this paper, we reported that ZnO nanoparticles (NPs) film modified with C60 pyrrolidine tris-acid ethyl ester (PyC60) was used as cathode buffer layer in inverted polymer solar cells. The resultant device with a blend of PTB7:PC71BM as photoactive materials exhibited an open-circuit voltage (Voc) of 0.753 V, a short-circuit current (Jsc) of 16.04 mA cm , a fill factor (FF) of 72.5%, and an o...

The fabrication of high efficiency (9-10%) microcrystalline silicon (μc-Si:H) p-i-n solar cells on glass has been so far reported mostly for cells deposited on sputtered and etched zinc oxide (ZnO). In this paper, we describe the preparation of μc-Si:H devices with efficiencies close to 10%, using glass coated with ZnO deposited by low pressure chemical vapor deposition (LPCVD). These results a...

Nanocrystalline n-ZnO thin films were deposited on SiO2-coated (0.45 μm) p type Si substrates (10-20Ω-cm) by a low cost chemical deposition technique to fabricate ZnO-based resistive sensors for methane detection. The nanocrystalline ZnO needle like structures were grown on RCA cleaned p-Si<100> substrates by successive immersion (100-200 times) into a Sodium Zincate bath (0.125M) kept at room ...

We report on a series of arene sulfonyl phthalimides which were prepared and used to modify polycrystalline gold and Au(111) gold surfaces. Three investigated compounds are the p-iodo-, the p-methoxy-, and the p-fluoro-benzenesulfonyl phthalimides. X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), and scanning tunneling microscopy (STM) studies were used to characterize the modif...

Nanostructured ZnO films are promising photoanode materials in photoelectrochemical water splitting. While such ZnO photoanodes have achieved high activity and good light conversion efficiency in the UV spectral region, their application in water splitting devices has been hampered by the susceptibility of ZnO towards photocorrosion in aqueous electrolytes. We report a systematic investigation ...

The work function (WF) of ZnO is modified by two types of dipole-bearing phenylphosphonate layers, yielding a maximum WF span of 1.2 eV. H3CO-phenyl phosphonate, with a positive dipole (positive pole pointing outwards from the surface), lowers the WF by ∼350 meV. NC-phenyl phosphonate, with a negative dipole, increases the WF by ∼750 meV. The WF shift is found to be independent of the type of Z...

The extrinsic physicochemical properties of nanoparticles (NPs), such as hydrodynamic size, surface charge, surface functional group, and colloidal stabilities, in toxicity testing media are known to have a significant influence on in vitro toxicity assessments. Therefore, interpretation of nanotoxicity test results should be based on reliable characterization of the NPs' extrinsic properties i...