The dispersion analysis in a fluid filled and immersed thermo–electro elastic hollow cylinder composed of homogeneous, transversely isotropic material is studied within the frame work of linear theory of elasticity. The motions of the cylinder are formulated using the constitutive equations of a transversely isotropic piezo–thermo elastic material with a preferred material direction collinear w...

A comprehensive computational framework based on the finite element method for the simulation of coupled hygro-thermo-mechanical problems in photovoltaic laminates is herein proposed. While the thermo-mechanical problem takes place in the three-dimensional space of the laminate, moisture diffusion occurs in a two-dimensional domain represented by the polymeric layers and by the vertical channel...

Human dentin exhibits a mechanical behavior like a functionally graded material with properties dependent on many physical and biological factors. This work describes and critically analyzes the methods to measure elastic moduli and damping and the corresponding results reported in literature. Furthermore, Mechanical Spectroscopy (MS) experiments have been carried out to determine with high pre...

In this study the α′′ stress-induced martensitic transformation and damping behaviour of the superelastic β-Ti–25Ta–25Nb alloy are investigated by tensile tests at room temperature and by dynamic mechanical analysis (DMA) in tensile mode for different applied stresses. Tensile tests show a fully non-linear elastic domain and, consequently, a specific method is proposed to determine the elastic ...

Damping measurements were carried out on two-phase (y-matrix, y'-precipitates) nickel-base alloys containing different volume fractions of y' in order to achieve a better understanding of the strong elastic modus decrease between 1000°C and 1 100°C. For the investigation of the damping a free-free beam flexural vibration technique was applied. Nickel-base alloys with a high volume fraction of y...

The high average power laser (HAPL) program goal is to develop a laser inertial fusion reactor using a solid first wall (FW). The FW of the inertial fusion energy (IFE) chamber is exposed to high energy photon, particle, and neutron fluxes at frequency of several Hz. The feasibility of using a micro-engineered refractory metals, such as tungsten foam as a solid FW armor is investigated. Refract...

In this work, three types of vehicle suspensions were considered and modeled as follows: oil damper mounted in parallel with a compression helical spring, for which a Kelvin-Voigt model, consisted of a dashpot and an elastic element connected in parallel is considered; colloidal damper without attached compression helical spring, for which a Maxwell model, consisted of a dashpot and an elastic ...

in this research, static stresses analysis of boron nitride nano - tube reinforced composite (bnntrc) cylinder made of poly - vinylidene fluoride (pvdf) subjected to non - axisymmetric thermo - mechanical loads and applied voltage is developed. the surrounded elastic medium is modelled by pasternak foundation. composite structure is modeled based on piezoelectric fiber reinforced composite (pfr...

Vertebrates and arthropods are both capable of load compensation during aimed limb movements, such as reaching and grooming. We measured the kinematics and activity of individual motoneurons in loaded and unloaded leg movements in an insect. To evaluate the role of active and passive musculoskeletal properties in aiming and load compensation, we used a neuromechanical model of the femur-tibia j...

A method is presented to determine the bulk elastic properties of isotropic elastic closed-cell foams from impedance tube sound absorption tests. For such foams, a resonant sound absorption is generally observed, where acoustic energy is transformed into mechanical vibration, which in turn is dissipated into heat due to structural damping. This article shows how the bulk Young's modulus, Poisso...