wind power has been widely considered and utilized in recent years as one of the most promising renewable energy sources. in the current research study, aerodynamic analysis of the upwind three-bladed horizontal axis turbine is carried out using blade element momentum theory (bem), and a genetic algorithm (ga) is applied as an optimization method. output power generation is considered as an obj...

The cause of crack initiation turbine blade had initially cracked by a fatigue mechanism over a period of time and then fractured by the overload at the last moment. Experimental procedure consists of macroscopic inspection, material verification, microscopic examination, and metallographic analysis and finally FE. And for these procedures, some specimens were prepared from a fractured blade. Us...

~The design of axial-flo~ turbines has been hampered in the past by a lack of comprehensive data regarding pressure losses and gas deflections through rows of turbine blades. In the present report much of the available information relating to this subject is studied and analysed to determine magnitudes of gas pressure losses and deflections in a wide variety of blade rows and also to determine ...

As wind turbines continue to grow larger, problems associated with adverse aerodynamic loads will grow more critical. Thus, the wind energy technical community has begun to seriously consider the potential of aerodynamic control methodologies for mitigating adverse aerodynamic loading. Spatial and temporal attributes of the structures and processes present in these flow fields hold important im...

SUMMARY The Denton two-dimensional and three-dimensional time marching blade-to-blade computer programs have been used at NGTE to analyse the flow past transonic turbine blading. In this work experience has been gained in operating the programs and this paper describes the major findings in respect of how the programs have performed. Solutions for several blade sections, giving Mach number dist...

The present work deals with the structural analysis of turbine blades and modeling of turbine blades. A common failure mode for turbine machines is high cycle of fatigue of compressor and turbine blades due to high dynamic stresses caused by blade vibration and resonance within the operation range of the machinery. In this work, proper damping system will be analyzed to reduce the vibrating bla...

This paper presents the results of research of the microstructure of the composite blade W55RBVS for the wind turbine of up to 6kW power after structural testing up to failure. The first part of the testing consists of the static testing of the structure up to the moment of the blade failure. The aim of the first part of the test was to define rigidity of the blade W55RBVS, to determine the max...

Initial results of an ongoing Navier-Stokes Computational Fluid Dynamics study of horizontal axis tidal current turbine hydrodynamics are presented. Part of the underlying motivation is assessing the effects of the Reynolds number on turbine performance and loads in steady and unsteady flow regimes. The study aims at a) providing initial verification and validation of Navier-Stokes CFD for stea...

When it comes to measuring blade-tip clearance or blade-tip timing in turbines, reflective intensity-modulated optical fiber sensors overcome several traditional limitations of capacitive, inductive or discharging probe sensors. This paper presents the signals and results corresponding to the third stage of a multistage turbine rig, obtained from a transonic wind-tunnel test. The probe is based...

The ongoing trend towards larger wind turbines intensifies the demand for more physically realistic wind turbine rotor aerodynamics models that can predict the detailed transient pressure loadings on the rotor blades better than current engineering models. In this report the mathematical, numerical, and practical aspects of a new wind turbine rotor flow simulation code is described. This wind t...