In this study, a new silica gel based adsorbent was fabricated and its ability in separation and quantification of alkanes mixture was investigated. Silica gel (SiO2) is a polar absorbent which is mainly used to separate polar compounds. Also, the carbon materials such as activated carbon and recently carbon nanotube (CNTs), have been widely used for separation of nonpolar materials. Carbon nan...

The pulmonary toxicity of multi-wall carbon nanotubes (MWCNT) were examined by intratracheal instillation. We prepared a well-dispersed MWCNT dispersion including MWCNTs of 3.71 μm geometric average length. The fiber length of most of the MWCNTs in the dispersion was 10 μm or less. The MWCNT dispersion was administered OPEN ACCESS Materials 2012, 5 2834 to rat lung by single intratracheal insti...

In this study, tin/tinoxide/multiwalled carbon nanotube (Sn/SnO2/MWCNT) nanocomposites were produced as anode materials for Li-ion batteries by a two-step process. Metallic tin was evaporated onto free-standing MWCNT buckypapers having controlled porosity and subsequently rf plasma oxidized in Ar:O2 (1:1) gas mixture. Besides, Sn/SnO2 nanocomposites were produced in the same conditions onto sta...

Addressed herein, functionalized multi-walled carbon nanotube (MWCNT) supported highly monodisperse nickel nanoparticles modified on glassy carbon electrode (Ni@f-MWCNT/GCE) were synthesized through microwave assisted method and examined for non-enzymatic glucose sensing in ionic liquids by cyclic voltammetry and chronoamperometry. The results of Ni@f-MWCNT/GCE electrode were compared with Ni N...

Functionalised multi-walled carbon nanotubes (MWCNTs) were cast on glassy carbon (GC) and carbon film electrodes (CFE), and were haracterised electrochemically and applied in a glucose-oxidase-based biosensor. MWCNT-modified carbon film electrodes were then used to evelop an alcohol oxidase (AlcOx) biosensor, in which AlcOx–BSA was cross-linked with glutaraldehyde and attached by drop-coating. ...

Abstract Purpose: our goal is to reduce the release rate of methotrexate (MTX) and increase cell death efficiency. Methods: Carboxylated multi-walled carbon nanotubes (MWCNT-COOH) were functionalized with MTX as a cytotoxic agent, FA as a targeting moiety and polyethylene amine (PEI) as a hydrophilic agent. Ultimately, MWCNT-MTX and MWCNT-MTX-PEI-FA were synthesized. Methotrexate re...

Abstract Purpose: our goal is to reduce the release rate of methotrexate (MTX) and increase cell death efficiency. Methods: Carboxylated multi-walled carbon nanotubes (MWCNT-COOH) were functionalized with MTX as a cytotoxic agent, FA as a targeting moiety and polyethylene amine (PEI) as a hydrophilic agent. Ultimately, MWCNT-MTX and MWCNT-MTX-PEI-FA were synthesized. Methotrexate re...

Multi-walled carbon nanotubes (MWCNTs) with systematically varied diameter distributions and defect densities were reproducibly grown from a modified catalyst structure templated in an amine-terminated fourth-generation poly(amidoamine) (PAMAM) dendrimer by microwave plasma-enhanced chemical vapor deposition. Thermal interface resistances of the vertically oriented MWCNT arrays as determined by...

Here we report the use of optoelectronic tweezers and dynamic virtual electrodes to address multiwalled carbon nanotubes (MWCNTs) with trap stiffness values of approximately 50 fNmum. Both high-speed translation (>200 mums) of individual-MWCNTs and two-dimensional trapping of MWCNT ensembles are achieved using 100,000 times less optical power density than single beam laser tweezers. Modulating ...

An enzymeless sensor based on a multi-walled carbon nanotubes-dicetyl phosphate (MWCNT-DCP) film modified vitreous carbon electrode was developed for the determination of hypoxanthine. The MWCNT-DCP film modified electrode showed a remarkable enhancement effect on the oxidation peak current of hypoxanthine. Under the optimized conditions, the oxidation peak current is proportional to the concen...