The measured dynamic surface tension of a water drop in air saturated by heptane vapor shows a sharp decrease from about 60 mN m−1 to 40 mN m−1, and less after a certain adsorption time. The observed adsorption kinetics is analyzed by a theoretical model based on multilayer adsorption of alkanes from the vapor phase at the water surface. The model assumes a dependence of the kinetic coefficient...

Currently, marine protein byproducts are mainly hydrolyzed and prepared for applications that depend on their physiological activity. Such uses require strict removal of heavy metal ions from the material. In this work, a green approach was proposed using peanut shells as adsorbent to remove Pb(II) from solutions containing amino acid and sodium chloride. The effects of amino acids and sodium c...

The present work describes the synthesis of copper oxide nanoparticles (CuONPs) via a solution process with the aim of applying the nano-adsorbent for the reduction of methylene blue (MB) dye in alkaline media. These NPs were characterized via Field emission scanning electron microscopy (FE-SEM), X-ray diffraction, high-resolution Transmission electron microscopy (TEM), and ultra violet UV-visi...

Waste materials with no further treatment such as orange barks from commercial oranges may act as adsorbent for the removal of Pb. Batch kinetic and equilibrium experiments were conducted to study the effects of contact time, initial pH, adsorbent dose and initial concentration of lead. The results show that the equilibrium was achieved less than 30 min of contact time. Three adsorption isother...

This research determined the adsorption performance of Florisil® impregnated with trihexyl(tetradecyl)phosphonium chloride (Cyphos IL-101) in the process of Cs+ removal from aqueous solutions. The obtained Florisil® impregnated with the studied ionic liquid was characterized through energy dispersive X-ray analysis and Fourier transform infrared spectroscopy in order to verify that the impregna...

Ginger waste material (GWM) has been utilized as adsorbent for removal of hazardousPatent Blue VF (PBVF) dye from aqueous solution. Batch adsorption experiments wereperformed as a function of pH, contact time, dye concentration, adsorbent dose and temperature.The optimum pH required for the maximum adsorption was found to be 2. The experimentalequilibrium adsorption data were tested using Langm...

Reaction of NiCl2·6H2O, D-camphoric acid (D-H2cam), and N,N′-bis(pyraz-2-yl)piperazine (bpzpip) in pure water at 150 ◦C afforded a novel nickel(II) coordination layer, [Ni4(D-cam)2(D-Hcam)4(bpzpip)4(H2O)2] (1), under hydro(solvo)thermal conditions. Single-crystal X-ray structure analysis reveals that 1 adopts a six-connected two-dimensional (2D) chiral layer structure with 36-hxl topology. Dye ...

the objective of this study is synthesis and characterization of the chitosan-silica composite (csc) and use them as an adsorbent material for peat water treatment. the resulting composite was characterizedby fourier transform infrared (ftir) spectroscopy, scanning electron microscope (sem), x-ray diffraction(xrd), n2 adsorption-desorption isotherm and zeta potential. the sorption experiments w...

The adsorptive capability of superheated steam activated biochar (SSAB) produced from Colocasia esculenta was investigated for removal of Cu(2+), Fe(2+) and As(5+) from simulated coal mine wastewater. SSAB was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy and Brunauer-Emmett-Teller analyser. Adsorption isotherm indicated monolayer adsorption which fitted...

The adsorption studies of phenol from aqueous solution on allium sativum peel have been studied in the range of 50-250 mg/L initial phenol concentration .The study was carried out as function of contact time, pH, initial phenol concentration,allium sativum Linn peel dosage and temperature. The experiment demonstrated the maximum phenol was obtained at in pH of 2 and it takes 6h to attain equili...