In this study we investigate metal spike formation of screen-printed Ag/Al pastes during contact firing in an infrared belt furnace and its influence on the characteristics of n-type bi-facial silicon solar cells. The boron emitters are formed in a co-diffusion step using boron doped PECVD layers. It is demonstrated that the formation of Ag/Al spikes results in strong FF and VOC losses limiting...

Thin films composed of titanium nitride doped with silver were deposited by DC reactive sputtering, with Ag contents varying between 0 and 50 at.%. The as-deposited samples were subjected to vacuum annealing treatments, with a range of temperatures varying from 200 to 500°C, in order to study the morphological and structural changes that may occur. The as-deposited samples showed three main zon...

In this paper, the moderately and lightly doped porous silicon nanowires (PSiNWs) were fabricated by the 'one-pot procedure' metal-assisted chemical etching (MACE) method in the HF/H2O2/AgNO3 system at room temperature. The effects of H2O2 concentration on the nanostructure of silicon nanowires (SiNWs) were investigated. The experimental results indicate that porous structure can be introduced ...

ABSTRACT Dye-sensitized solar cells composed of a photoanode of Ag nanoparticle (NP)-deposited TiO2 nanotube (TNT) arrays were fabricated. The TNT arrays were prepared by anodizing Ti films on fluorine-doped tin oxide (FTO)-coated glass substrates. Efficient charge transportation through the ordered nanostructure of TNT arrays should be carried out compared to conventional particulate TiO2 elec...

A silver nanoparticle-decorated N,S-co-doped TiO2 nanocomposite was successfully prepared and used as an efficient photoanode in high-performance dye-sensitized solar cells (DSSCs) with N719 dye. The DSSCs assembled with the N,S-TiO2@Ag-modified photoanode demonstrated an enhanced solar-to-electrical energy conversion efficiency of 8.22%, which was better than that of a DSSC photoanode composed...

In the present study, silver-doped TiO2 (Ag/TiO2) nanoparticles were prepared by various Ag doping (wt%) and a combination of sol-gel and ultrasound irradiation. Ag/TiO2 nanoparticles were characterized by energy-dispersive X-ray analysis (EDX), scanning electron microscopy (SEM) and X-ray diffraction (XRD) techniques. Based on the Taguchi method, photocatalytic...

The field of nanophotonics has ushered in a new paradigm of light manipulation by enabling deep subdiffraction confinement assisted by metallic nanostructures. However, a key limitation which has stunted a full development of high-performance nanophotonic devices is the typical large losses associated with the constituent metals. Although silver has long been known as the highest quality plasmo...

Combined CV studies and UV-Vis-NIR spectroelectrochemical investigations revealed an unusual stability of the p- and n-doped PMOThOD in the wide potential window of 4 V. The n-doping process occurs in this polymer down to -2.7 V (vs. Ag/Ag+) in a non-destructive way with the characteristic development of the omega3 transition as a function of the doping level. In situ electronic transport studi...

We describe a study of the magneto-optical properties Ag+-doped CdSe colloidal nanoplatelets (NPLs) that were grown using novel doping technique. In this work, we used magnetic circularly polarized luminescence and circular dichroism spectroscopy to light-induced magnetism for first time in 2D solution-processed structures doped with nominally nonmagnetic Ag+ impurities. The excitonic polarizat...

This paper investigated the effect of two-step ultrasound irradiation (miniaturization and oxidation) on various gallium-based liquefied alloys in ethanol hydrazine monohydrate at 60 °C. The miniaturization oxidation behavior were analyzed. In Ga-based alloy system, process was not as efficient that pure gallium due to changes corrosive properties, surface tension, viscosity caused by addition ...