The aim of the present work is to determine the influence of technologically produced boron surface layers on the friction parameters in the sliding pairs under mixed friction conditions. The current boronizing processes allow obtaining surface layers of high hardness and high resistance to corrosion and wear, with low brittleness and no tendencies towards cracking However, the operation charac...

Zinc coating is formed by the heterogeneous assembly of the Γ, Γ1, δ, ζ and η phases whose mechanical properties greatly differ from each other. Thermal strains resulting from large differences between thermal expansion coefficients are partially relaxed by the formation of a crack network. In order to model this phenomenon, initial hardness, thermal expansion coefficient αi and toughness (KIC)...

Formation mechanism of silicon modified aluminide coating applied on a nickel base super alloy IN-738 LC by pack cementation process was the subject of investigation in this research. Study of the microstructure and compositions of the coating was carried out, using optical and scanning electron microscopes, EDS and X-ray diffraction (XRD) techniques. The results showed that due to low partial ...

K465 superalloy with high titanium and aluminum contents was easy to crack during laser metal deposition. In this study, the crack-free sample of K465/Stellite-6 laminated material was formed by laser metal deposition shaping to control the cracking behaviour in laser metal deposition of K465 superalloy. The microstructure differences between the K465 superalloy with cracking and the laminated ...

High structural perfection, wafer uniformity, and reproducibility are key parameters for high-volume, low cost manufacture of resonant tunnelling diode (RTD) terahertz (THz) devices. Low-cost, rapid, and non-destructive techniques are required for the development of such devices. In this paper, we report photoluminescence (PL) spectroscopy as a non-destructive characterisation technique for hig...

Fluidized bed processing is a relatively novel method for coating metal substrates. A detailed study was carried out into surface property and in micro-structure changes induced by fluidized bed processing. In particular, fluidized bed processing of AA 6082 T6 aluminum alloy components using alumina Al2O3 powder was investigated. Firstly, the build up of Al2O3 films was studied and characterize...

We describe a model for non-convecting diffusion-controlled solidification of a ternary (three-component) alloy cooled from below at a planar boundary. The modelling extends previous theory for binary alloy solidification by including a conservation equation for the additional solute component and coupling the conservation equations for heat and species to equilibrium relations from the ternary...

The AlN incorporation probability in single crystal Hf1 xAlxN(0 0 1) layers is controllably adjusted between 0% and 100% by varying the ion energy (Ei) incident at the growing film over a narrow range, 10–40 eV. The layers are grown on MgO(0 0 1) at 450 C using ultrahigh vacuum magnetically unbalanced reactive magnetron sputtering from a Hf0.7Al0.3 alloy target in a 5%-N2/Ar atmosphere at a tot...

In this work, the characterization of the assembly of a steel shaft into a γ-TiAl part for turbocharger application, obtained using Electron Beam Welding (EBW) technology with a Ni-based filler, was carried out. The Ti-48Al-2Nb-0.7Cr-0.3Si (at %) alloy part was produced by Electron Beam Melting (EBM). This additive manufacturing technology allows the production of a lightweight part with comple...