Real-time in situ synchrotron X-ray tomographic microscopy was used to gain new insights into and quantify the nucleation mechanisms and growth kinetics of b-Al5FeSi intermetallics during solidification of an aluminium Al–7.5Si–3.5Cu–0.6Fe (wt.%) alloy. Three new insights were obtained. First, the plate-like b-intermetallics appeared to nucleate mainly on or near the primary aluminium dendrites...

Flexible forming is a sheet metal forming process with the application of soft material tooling. In this study, flexible (silicone rubber, SR, and styrene butadiene rubber, SBR) and semi-rigid (polyamide 66, PA) polymeric materials were adopted to make several upper dies which were used in combination with aluminium lower dies. Stamping operations were performed on a thin aluminium alloy sheet ...

An hydrodynamic code coupled with a "PUFF-type" equation of state has been set up to investigate the thermomechanical behaviour of an aluminium alloy irradiated by a 1 MeV electron beam. The absorbed flux can reach 3500 J/cm2 with an exponential damping along 1 mm dep;th. A weaker flux .is produced with 1 MeV protons whose the stopping range is 10 pm for a 8000 J/g dose. Thermal stresses genera...

Resistance spot welding (RSW) is the most popular joining technique used by automotive industries for the manufacture of automobile body structure. In automobile industries, the weight saving effect of replacing steel parts is an important factor in reducing fuel consumption and increasing speed and natural resources savings. In this study, A5052 aluminium alloy sheet having 1 mm thickness were...

Background: AA2519-T87 is a new armour grade aluminium alloy employed in the fabrication of light combat military vehicles. Joining of this material using fusion welding processes, results in the formation of solidification defects like porosity, alloy segregation and hot cracking. In order to overcome the solidification related problems, solid state welding processes such as friction stir weld...

Objective: The aims of this study were to investigate the release of element from, and the biological response in vitro to, cobalt-chromium alloys and other base-metal alloys used for the fabrication of metal-ceramic restorations. Material and methods: Eighteen different alloys were investigated. Nine cobalt-chromium alloys, three nickel-chromium alloys, two cobalt-chromium-iron alloys, one pal...

Self-lubricating composites are designed to obtain materials that reduce energy consumption, improve heat dissipation between moving bodies, and eliminate the need for external lubricants. The use of a solid lubricant in bulk composite material always involves a significant reduction in its mechanical properties, which is usually not an optimal solution. The growing interest in multilayer graph...

Light weight materials coupled to the need for cost-effective processing have combined to create a significant opportunity for aluminium powder metallurgy as its increasing interest. Aluminium alloy (AA 2219) metal matrix composite reinforced with multi walled carbon nanotube (MWCNT) produced by powder metallurgy (P/M) technique was analysed and CNTs dispersion were traced. The micro hardness a...

Friction stir welding is advance joining process for different similar and dissimilar metals. It is commonly used for joining of Aluminium alloys. In this study an attempt were made to join commercial structuralaluminium with 7039 aluminium alloy. A zig-zag pattern of hardness was found in weld nugget. Microstructural characterization and fractography of joints were examined using optical and s...

Aluminium and its alloys belong to the most widely used metallic materials for industrial applications. One of the possible casting methods is twin-roll casting which produces sheets with high solid solution supersaturation. Decomposition of this supersaturated material during heat treatment was studied in aluminium alloys from the AW-3003 series – one standard grade and the other modified by a...