Large-area phosphorus-doped carbon nanosheets (P-CNSs) are first obtained from carbon dots (CDs) through self-assembly driving from thermal treatment with Na catalysis. This is the first time to realize the conversion from 0D CDs to 2D nanosheets doped with phosphorus. The sodium storage behavior of phosphorus-doped carbon material is also investigated for the first time. As anode material for ...

Anode aluminum oxide-supported thin-film fuel cells having a sub-500-nm-thick bilayered electrolyte comprising a gadolinium-doped ceria (GDC) layer and an yttria-stabilized zirconia (YSZ) layer were fabricated and electrochemically characterized in order to investigate the effect of the YSZ protective layer. The highly dense and thin YSZ layer acted as a blockage against electron and oxygen per...

Ni-YSZ anode supported solid oxide fuel cells (ASCs) were tested under various simulated syngas. There was no voltage degradation of the cell operated on 41%H2-7%CH4-6%CO-11%CO2-35%H2O fuel condition for nearly 450 hours. However, the high vapor content reduced the open circuit voltage (OCV) and discharge voltage. The cells run steadily with most dry syngas until the simulated reforming tempera...

Ammonia is being considered as a promising alternative to hydrogen fuel in solid oxide cells (SOFCs) due its stability and ease of storage transportation. This study investigates the feasibility using ammonia tubular SOFC for shipborne unmanned aerial vehicles (UAVs). The paper develops 3D model tubular-anode-supported single cell conducts numerical simulations analyze impact different operatin...

Dynamic simulation of an anode-supported tubular SOFC is performed to study the transients of current and the transport fields in the cell. The time constants of the system are studied and the possible explanations for their variation within the cell and at various overpotentials are presented. It was observed that the gain of the system varies depending upon the operating conditions of the sys...

lithium-ion batteries due to their higher energy density and lower associated environmental impacts comparing to the other batteries, recently have been highly considered. the materials used in anode, are one of the most important parts affecting batteries’ energy density and environmental impacts. the aim of this study is to investigate how environmental emissions of different materials as ano...

PtMo alloy and MoO(x)@Pt core-shell nanoparticles (NPs) were successfully synthesized by a chemical coreduction and sequential chemical reduction method, respectively. Both the carbon-supported alloy and core-shell NPs show substantially higher CO tolerance, compared to the commercialized E-TEK PtRu alloy and Pt catalyst. These novel nanocatalysts can be potentially used as highly CO-tolerant a...

The design and operating characteristics of relativistic, electron beam magnetrons are described. The magnetrons are comprised of a pulsed field-emission cathode (-360kV, ~15kA, -30nsec) and several coupled resonators embedded in the anode block. The tubes are designed to work at fixed frequency, in range from 2.3 to 5GHz. The peak powers generated are typically 500 to 1000MW. *This work was su...