Abstract One of the biggest energy consumers and CO2 emitters in world is steel sector. With growth infrastructure construction, output has risen year over year. Therefore, a life cycle assessment inputs outputs at each stage manufacturing process necessary to enable adoption management offer sustainable production consumption. The Life Cycle Assessment method employed this study assess environ...

This investigation develops a revisable method for estimating the estimate value of equivalent 10 Hz voltage flicker (DV10) of a DC Electric Arc Furnace (EAF). This study also discusses three 161kV DC EAFs by field measurement, with those results indicating that the estimated DV10 value is significantly smaller than the survey value. The key point is that the conventional means of estimating DV...

The first successful detection of plutonium with a continuous microwave plasma emissions monitor has been demonstrated. Seven plutonium emission peaks in the 362 366 nm and 449 454 nm ranges were clearly observed. The strongest peak was at 453.62 nm. This peak and five of the other plutonium peaks were easily distinguishable from possible interference from iron emission peaks with a spectromete...

Bottom-blowing, as widely adopted in electric arc furnace (EAF) steelmaking technology, stir the molten bath by blowing inert gas (Ar, N2) from the bottom of EAF to promote fluid flow and uneven metallurgical reaction in the molten bath. However, for eccentric structure design of electric arc furnace, the problem still exists in EBT(Eccentric Bottom Tapping)area. In this study, by the analysis ...

The energy used to produce austenitic stainless steel was quantified throughout its entire life cycle for three scenarios: (1) current global operations, (2) 100% recycling, and (3) use of only virgin materials. Data are representative of global average operations in the early 2000s. The primary energy requirements to produce 1 metric ton of austenitic stainless steel (with assumed metals conce...

An important aspect of non-ferrous metal production is the separation process known as smelting, in which the concentrated ore is melted and separated into two components of different densities: the slag and the matte. The smelting process is carried out through high-power heating in electric arc furnaces. In order to maintain a constant desired matte production rate and constant matte and slag...

The electrical resistance of mats of single-wall carbon nanotubes (SWNTs) is measured as a function of mat temperature under various helium pressures, in vacuum and in atmospheric air. The objective of this paper is to study the thermal stability of SWNTs produced in a helium arc discharge in the experimental conditions close to natural conditions of SWNT growth in an arc, using a furnace inste...

This paper analyzes how feasible it is to use electric arc furnace slag as coarse aggregate, and blast furnace dust as fine aggregate in the manufacture of hot asphalt concrete for roads. Three mixtures were designed using the Ramcodes methodology, the M1 mixture of control with conventional materials, the M2 mixture replacing 50% and the M3 mixture replacing 100% of the conventional aggregates...

While the sources of releasing dioxins have received much attention, the health risks of incinerators are studied considerably more than those of other sources, such as metallurgical industry. Furthermore, risk assessments focus primarily on the effects of single sources; few have addressed the aggregate risks from multiple sources in a region. When many sources of dioxins exist in an area, suc...