in this article, thermo-elastic-behavior of a thick-walled cylinder made from a polystyrene nanocomposite reinforced with functionally graded (fg) single-walled carbon nanotubes (swcnts) was carried out in radial direction while subjected to a steady state thermal field. the swcnts were assumed aligned, straight with infinite length and a uniform layout. two types of variations in the volume fr...

Tension wood generates axial tensile stress and tangential compressive stress during its formation, but the mechanism causing this stress is not yet fully understood. A micro-mechanical model is used to test different hypothetic mechanism, based on the assumption that one of the constituents of tension wood undergoes a dimensional change during the formation of the wall. The consistency between...

The nondestructive testing technique used to evaluate the quality of bolt support by detecting axial force is suitable for with a short construction time. For in state long time period, it may lead detection small only and ignore fact that has entered necking fracture stage, thus fail detect safety hazards Three sets parallel tests were conducted solve misjudgment results due reduction when was...

The risk of sustaining tibia fractures as a result of a frontal crash is commonly assessed by applying measurements taken from anthropometric test devices to the Tibia Index. The Tibia Index is an injury tolerance criterion for combined bending and axial loading experienced at the midshaft of the leg. However, the failure properties of human tibia compact bone have only been determined under st...

In this study the pressure-drop, mean and rms axial velocity data are measured using a differential pressure transducer and a laser Doppler anemometer for the flow of Newtonian and non-Newtonian fluids in a concentric annular pipe (radius ratio =0.5) at various Reynolds numbers encompassing the laminar, transitional and turbulent regimes. Three different fluids are utilized; a semi-rigid shear-...

We consider the displacement of an elastic material under an external compression (axial or almost axial stress). We assume that only one component of the displacement is observed, in the direction of compression (axial displacement), or alternatively, that two components are observed in a plane. These hypotheses are in accordance with an imaging modality, namely ultrasonic elastography. In the...

The existence of multi-axial states of stress cannot be avoided in elevated temperature components. It is essential to understand the associated ailure mechanisms and to predict the lifetime in practice. Although metal creep has been studied for about 100 years, many problems are still nsolved, in particular for those involving multi-axial stresses. In this work, a state-of-the-art review of cr...

Combined in-phase tension/torsion loading was applied to 8-ply 45° 4 E-glass/epoxy composite shafts under monotonic and fatigue conditions to determine the effects of multi-axial loading on its failure. A damage criterion for multi-axial monotonic loading was proposed considering the contribution of both normal and shear stresses on the plane of failure. The experimental data showed an excellen...

Three-dimensional L4-L5 finite element (FE) models of three disc heights (9.5mm, 11.5mm, and 13.5mm) and three disc wedge angles (5o, 8 o, and 10 o) were developed to investigate their effect on L4-L5 lumbar motion segment under pure axial compressive loading. The FE predictions indicated that the axial disc displacement and the posterior disc bulge increased greatly with an increase in the ave...